PIC GmbH • Nibelungenstr. 5A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] • www.pic-gmbh.com HSR-V10K Pb High Voltage Reed Switch Lead free Electrical Characteristics Contact form A Contact material W* Contact rating max. W / VA 50 Switching current max. A 3.0 Carry current max. A 4.5 VDC 7500 VAC 5000 Breakdown voltage min. VDC 10000 Contact resistance (initial) max. mΩ 150 Insulation resistance min. Ω 10 10 Capacitance typ. pF 1.0 Pull in range available AT 100 - 150 Drop out min. AT 30 Test coil TC 093 Operate time (incl. bounce) max. ms 3.0 Release time max. ms 1.0 Switching frequency max. Hz 50 Resonant frequency typ. Hz 300 Vibration (50-2000 Hz) g 30 Shock (1/2 sin 11 ms) g 100 Operating temperature °C Switching voltage max. *Minimum load for contact material W: 3 Watts ! Magnetical Characteristics Operating Characteristics Dimensions -60 to +125 in mm A = Total length nom. 82.00 B = Glass length max. 53.40 C = Glass diameter max. 5.40 B 26.0 D = Wire diameter nom. 5.9 C D 0.60 x 2.5 E E = Gap location nom. 41.00 A © PIC GmbH, Nürnberg (GERMANY) hsrv10k_e Rev. 2.2 Page 1 of 1