P Premier M Magnetics Inc. "INNOVATORS IN MAGNETICS TECHNOLOGY" ISDN-U THRU HOLE & SMD ISOLATION TRANSFORMERS ! Matched to Leading Transceiver ICs. # 1500 & 3000Vrms Isolation Voltage " Industry Leading SMD Package Designs $ IEC60950 2.5 & 5.0mm Creepage Versions ELECTRICAL SPECIFICATIONS AT 25OC - OPERATING TEMPERATURE RANGE 0OC TO +70OC CLICK ON THE RESPECTIVE PART NUMBER TO DISPLAY A DETAIL DATA SHEET PART NUMBER TURNS RATIO PRIMARY (Line Side) (Chip:Line) PINS SEC:PRI ± 3% PRIMARY PRI SECONDARY SECONDARY HI-POT PRIMARY (Line Side) (Line Side) DC Bias (Chip Side) (Chip Side) Vrms OCL mH DCR Ω MAX mA MAX PINS DCR Ω MAX MIN Package & Schematic PM-IU04 PMI-U05 PM-IU06 PM-IU072 PM-IU101 PM-IU15 PM-IU16 1:1.25 1:1.25 1:1.50 1:1.25 1:1.50 1:1.25 1:1.50 1-4 1-5 4-2 1-5 5-1 5-1 5-1 26-30 26-33 27 +5% 26-33 78-88 26-30 26-30 6.0 8.0 10.0 8.0 12.5 15.0 15.0 50 60 60 60 90 40 40 6-8 9-7 9-7 9-7 7-10 6-10 6-10 12.0 12.0 1.7 12.0 13.5 7.5 7.5 1500 1500 1500 3000 3000 1500 1500 1811 SMD TS2311 TS2311 TS2318 EPC25 EP13 SMD EP13 SMD PM-IU25 PM-IU26 1:1.25 1:1.50 6-1 6-1 26-33 26-33 15.0 15.0 65 65 7-12 7-12 7.5 7.5 1500 1500 EPC19 SMD EPC19 SMD NOTES: PRIMARY (LINE SIDE) LONGITUDINAL BALANCE:1KHZ TO 4KHZ -58db MINIMUM ; 4KHZ TO 160KHZ -60db MINIMUM 1) PM-IU10 & PM-IU11 DESIGNED FOR > 5.0mm Creepage & Clearance 2) PM-IU07 DESIGNED FOR > 2.5mm Creepage & Clearance EP13 SMD MECHANICAL 10 9 8 7 PM-IU15 & PM-IU16 WHITE DOT DENOTES PIN #1 6 1 10 P PM-IUXX M YYWW PRI #1B PRIMARY (LINE SIDE) PIN #1 WHITE DOT 1 2 3 4 PRI #1A NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#4 .010 (0.25) 2 3 4 .028 (0.7) MIN 5 6 5 .480 (12.19) MAX .100 (2.54) .590 (15.00) MIN RECOMMENDED P.C.B. LAYOUT Dimensions in inches (mm) .787 (20.00) MAX .800 (20.32) .52 (13.2) 10 9 8 7 SECONDARY (CHIP SIDE) SEC #1A .530 (13.46) MAX CORE TAPED 1 8 4 5 .520 (13.20) MAX .028 (0.70) SEC #1B 2 .787 (20.00) MAX .050 (1.27) 6 Specifications subject to change without notice. .150 (3.81) 1 10 5 6 .100 (2.54) pmiu 06/99 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 • TEL: (949) 452-0511 • FAX: (949) 452-0512 • http://www.premiermag.com 1 P Premier M Magnetics Inc. ISDN-U THRU HOLE & SMD ISOLATION TRANSFORMERS "INNOVATORS IN MAGNETICS TECHNOLOGY" PM-IU05 TS2311 MECHANICAL PIN #1 NOTCH WHITE DOT DENOTES PIN #1 1 3 4 P PM-IU05 M XXXX 2 1 10 9 9 PRI #1B 8 PRIMARY (LINE SIDE) 7 5 SEC #1A 2 6 SECONDARY (CHIP SIDE) 8 4 SEC #1B PRI #1A .920 (23.36) MAX 1.070 (27.18) MAX 7 5 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#4 .470 (11.93) MAX .210 (5.33) TYP .020 (.51) .150 (3.81) .800 (20.32) .045 (1.14) .300 (7.62) PM-IU06 TS2311 MECHANICAL PIN #1 NOTCH 3 4 5 P PM-IU06 M XXXX 2 WHITE DOT DENOTES PIN #1 10 1 4 9 7 8 PRI #1B 7 PRIMARY (LINE SIDE) REMOVE TERMINAL #6 .920 (23.36) MAX 1.070 (27.18) MAX 1 5 PRI #1A SEC SECONDARY (CHIP SIDE) 9 2 .470 (11.93) MAX .020 (.51) .800 (20.32) NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN #1 TO PIN #5 .210 (5.33) TYP .150 (3.81) .045 (1.14) .300 (7.62) Specifications subject to change without notice. pmiu 06/99 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 • TEL: (949) 452-0511 • FAX: (949) 452-0512 • http://www.premiermag.com 2 P Premier M Magnetics Inc. ISDN-U THRU HOLE & SMD ISOLATION TRANSFORMERS "INNOVATORS IN MAGNETICS TECHNOLOGY" PM-IU07 TS2318 MECHANICAL PIN #1 NOTCH WHITE DOT DENOTES PIN #1 1 1 10 P PM-IU07 M YYWW 2 3 4 5 9 9 PRI #1B 8 7 PRIMARY (LINE SIDE) 6 SEC #1A 2 SECONDARY (CHIP SIDE) 8 4 SEC #1B PRI #1A .940 (23.88) MAX 1.100 (27.94) MAX 7 5 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#4 .725 (18.42) MAX .210 (5.33) TYP .020 (.51) .150 (3.81) .800 (20.32) .300 (7.62) .045 (1.14) NOTE1: REINFORCED INSULATION, UL1950, IEC950, CSA-950: A) MATERIALS MEET "UL", "CSA" & "IEC" REQUIREMENTS B) MATERIALS ARE CLASS B (130OC) OR BETTER. C)MARGIN WOUND FOR > 2.5mm CREEPAGE.CLEARANCE D)VARNISH FINISHED ASSEMBLY. PM-IU04 1811 SMD MECHANICAL 8 7 6 5 WHITE DOT DENOTES PIN #1 1 P PM-IU04 M YYWW 8 PRI #1B 1 2 3 4 .760 (19.30) MAX PRIMARY (LINE SIDE) .760 (19.30) MAX 2 3 .500 (12.70) MAX .004 (0.10 ) .038 (0.97) .300 (7.62) 7 SECONDARY (CHIP SIDE) SEC #1A PRI #1A .150 (3.81) SEC #1B .750 (19.05) 6 4 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#4 .935 (23.80) MAX Specifications subject to change without notice. pmiu 06/99 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 • TEL: (949) 452-0511 • FAX: (949) 452-0512 • http://www.premiermag.com 3 P Premier M Magnetics Inc. ISDN-U THRU HOLE & SMD ISOLATION TRANSFORMERS "INNOVATORS IN MAGNETICS TECHNOLOGY" EPC19 SMD MECHANICAL 12 11 10 9 8 PM-IU25 & PM-IU26 RECOMMENDED P.C.B. LAYOUT Dimensions in inches (mm) 7 24.8 (.976) 12x1.5 (.060) 1 12 12x0.8 (.031) WHITE DOT DENOTES PIN #1 5x2.5 (.100) 1 12 PRI #1B 6 PIN#1 I.D. ON BOBBIN 1 2 3 4 5 19.81 (.780) MAX P M PRIMARY (LINE SIDE) 7 6 0.7 (.028) PRI #1A 10.16 (.400) MAX 6 1 0.13 (.005) 9 5 7 6 6 7 21.7 (.854) 0.4 (.016) 24.7 (.972) MAX 2.5 (.098) NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#5 PM-IU10 EPC25 MECHANICAL 11 10 9 8 7 SECONDARY (CHIP SIDE) SEC #1A CORE TAPE PM-IU25 YYWW SEC #1B 2 6 DOT/CHAMPHER DENOTES PIN #1 1 10 PRI #1B PIN#1 I.D. WHITE DOT 1 2 3 4 5 25.75 (1.014) MAX PRIMARY (LINE SIDE) 26.0 (1.024) MAX CORE TAPED 2 4 SEC #1B 8 SECONDARY (CHIP SIDE) SEC #1A P PM-IU10 M YYWW PRI #1A 17.00 (.670) MAX 4.85 (.191) 7 5 1 5.00 (.197) 4-PLCS 5 2 NOTE: 1) PRIMARY CENTER TAP IS FORMED BY CONNECTING PIN#2 TO PIN#4 4.5 (.177) 20.0 (.787) 20.0 (.787) 1 3.0 (.118) 3 4 5 0.8 DIA. 11-PLCS 20.0 (.787) 3.75 (.148) 5-PLCS 11 10 9 8 7 6 C L 18.75 (.738) NOTE1: REINFORCED INSULATION SYSTEM, UL1950, IEC950, CSA-950: A) ALL MATERIALS MEET "UL", "CSA" & "IEC" REQUIREMENTS B) ALL MATERIALS ARE CLASS B (130OC) OR BETTER. C)MARGIN WOUND FOR > 5.0mm CREEPAGE.CLEARANCE D)VARNISH FINISHED ASSEMBLY. Specifications subject to change without notice. pmiu 06/99 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 • TEL: (949) 452-0511 • FAX: (949) 452-0512 • http://www.premiermag.com 4