Pomona ® Model 2BC-BNC BNC Male To Multi-Stacking Double Banana Plug FEATURES: • Cable allows interconnection between Banana Plug and BNC based test instruments. • Cable is shielded to reduce the effect of signal leakage or noise interference. • BNC connector center contact is gold plated and the dielectric is PTFE for superior performance. • Double Banana Plug is molded directly to the cable for superior cable strength. • Double Banana Plug features nickel plated Beryllium Copper springs for tarnish resistance and long insertion life • Double Banana Plug has vertical and horizontal stacking capabilities for test versatility. • Schematic: Banana Plug ground to BNC shell, Banana Plug non-ground to BNC center contact. MATERIALS: BNC: Body: Brass, Nickel Plated, Center Pin: Brass, Gold Plated, Impedance: 50 Ohms Cable: RG58C/U, Impedance: 50 Ohms, Capacitance: 30.8 pF/Ft., O.D.: .195” (5,0mm) Nom. Marking “POMONA 2BC-BNC-36” Double Banana Plug: Body – Brass, Nickel Plated Spring – Beryllium Copper, Nickel Plated Insulation - Polypropylene, Color: Black RATINGS: Operating Voltage: Hand-held testing: 30VAC/60VDC Max. Hands free testing in controlled voltage environments: 500 WVDC Max Operating Temperature: 55°C (+131°F) Max. ORDERING INFORMATION: Model 2BC-BNC-XX XX = Length in Inches, Standard Length: 36” (91,44 cm) Additional lengths can be quoted available upon request. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 909-469-2900 Fax: 909-629-3317 Technical Assistance: 800-241-2060 R:\Release\DataSheet\1_Market_00\D_2BC-BNC_1_01.doc PomonaACCESS 90315 (800) 444-6785 or (949) 253-3858 More drawings available at www.pomonaelectronics.com Page 1 of 1