POMONA 3601

Model 3601 & 3606
Die Cast Aluminum Box
Painted, Size “D”
MATERIALS:
Screws: 4 each #4-40 x 6.35 (1/4”) Phillips pan head pr MS 35206-213
with blue zinc plating.
Cover: 1.60 (.063) thick aluminum Alloy 1100-H14
Finish: Clear anodized per MIL-A-8625,
Shielded Housing: Die cast aluminum alloy A380 or A384.
Finish:
Model 3601: Blue baked enamel per Federal Standard 595 #25109 over
primer wash per DOD-P-15328.
Model 3606: Bare die cast aluminum.
Model 3606
RATINGS:
Operating Temperature: +302°F (+150°C) Max.
ORDERING INFORMATION:
Model 3601 (Blue baked enamel)
Model 3606 (Bare die cast aluminum)
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected])
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 100
D1093962, D1093965
Page 1 of 1