Pomona ® Model 3787 BNC Male To Minigrabber® Test Clips FEATURES: • Cable assembly is perfect for interfacing test instruments to discrete test points. • BNC connector is the highest quality, field replaceable construction. The nickel plated shell resists corrosion and the gold plated center contact promotes high quality, low resistance connections in the field and the laboratory. • Breakout wires are crimped to the cable conductors and over-molded with a flexible PVC strain relief for long service life. MATERIALS: BNC Male: Body - Brass, Tarnish Resistant Plating, Center Contact - Brass, Gold Plated, Dielectric: PTFE, Impedance: 50 Ohms Minigrabber® Test Clips: Contact, Beryllium Copper, Gold Plated, Insulation: Nylon, Color: One Black/One Red Breakout Wires: 20 AWG, 41 x 36 t.c., PVC Insulation, O.D. .087" (2,21 mm), Color Matches Grabbers Molded Breakout: PVC, Color: Black Cable: RG58C/U Coaxial cable, Non-contaminating PVC jacket. Impedance: 50 Ohms RATINGS: Operating Voltage: 45 VRMS Max. Operating Temperature: +50° C (+122° F) ORDERING INFORMATION: Model 3787-C-XX XX = Length in Inches Standard Lengths: -18"” (45,72), -24" (61 ), -36" (91,44 ), -48" (122 ), -60" (152,4 ) Additional lengths can be quoted upon request. Ordering Example: 3787-C-36 Cable length is 36" (91,44) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 S:\Engineering \Release\DataSheets\FlukeDataSheet\d3787_1_01.doc Made in USA PomonaACCESS 90328 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1