Pomona® Model 5053 Micrograbber® Test Clip To Stacking Banana Plug FEATURES: • Banana Plug is cross stackable and vertical stackable. • Ideal for connecting test equipment to small circuit board components. • Banana Plug will mate to Model #1581 or any standard Banana Jack. MATERIALS: Conn: 1st End - Micrograbber® Material: Contact – Beryllium Copper, Alloy 165 per QQ-C-533, ¼ HM. Spring – Stainless steel, 302. Finish: Contact – Gold plated per MIL-G-45204, Type II, Class 00 over electroless nickel. Insulation: Glass filled nylon molded to contact and wire. Color matches color of wire. Marking: “POMONA ELECTRONICS” “MICROGRABBER®.” Wire: 20 AWG stranding 41 x 36 t.c., PVC insulated 2.21 (.087) O.D. Marking: “POMONA 5053-*”. Color: See Ordering Information. Conn: 2nd End – Stacking Banana Plug Material: Spring – Beryllium Copper, Berylco 25 per QQ-C-533, cond. HT. Plug Body – Brass per QQ-B-626, Alloy 360, ½ hard. Finish: Nickel plated per QQ-N-290, Class 2, 200/300 microinches. Insulation: Polypropylene molded to plug body and wire. Color matches color of wire. RATINGS: Operating Temperature: +55ºC (+131ºF) Max. Operating Voltage: 150 VRMS/DC Current: 3 Amperes ORDERING INFORMATION: Model 5053-XX-* XX = Cable Lengths, Standard Lengths: 24” (610mm), 36” (914mm), & 48” (1219mm) Additional lengths and colors can be quoted upon request. *= Color, -0 Black, -2 Red Ordering Example: 5053-36-2 Indicates 36” in length, color is Red All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 10/1/07 D1094268 Rev. 101 Sales: 800-490-2361 Fax: 425-446-5844 Technical Support: [email protected] www.pomonaelectronics.com Page 1 of 1