Pomona ® Model 5170 Do-It-Yourself In-Line Banana Plug With Flexible Boot FEATURES: • Ideal for making test cables and field repairs. • Use with Model #5168 Banana Jack to make extensin cables • Part will accept 14, 16 AWG wire, crimp or solder connection. • Snap-on two piece design allows the wire to be crimped or soldered. MATERIALS: In-Line Banana Plug Plug Body: Brass per QQ-B-626, Alloy 360, ½ Hard. Spring: Beryllium Copper per ASTM B194. Alloy 172, Cond. HT. Insulation: Flexible PVC. Marking: “POMONA” Finish: Banana Plug – Nickel plated per QQ-N-290, Class 2, 200/300 micro-inches. RATINGS: (Independent of Wire) Operating Temperature: +50°C. (+122°F.) Max. Working Voltage: Hand-held testing: 30VAC/60VDC Max. Hands free testing in controlled voltage environments: 5000 WVDC Max. Current: 15 Amperes ORDERING INFORMATION: Model 5170-* *=Color, -0 Black, -2 Red Ordering Example: 5170-0, Color is Black Colors other than those specified are available on request. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 C:\Laura Goldberg\FlukeDataSheet\d5170_1_01.doc PomonaACCESS 90625 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1