Model 5189 BNC (Male) To Micrograbber Test Clips FEATURES: • Breakout converts BNC (Female) cables/connectors to Micrograbber® Test Clips for test versatility. • BNC connector and grabber cap are molded directly to the wire for pull strength durability and dust/moisture resistance. • Grabber hook and BNC center contact are beryllium copper for superior strength. • Grabber hook and BNC center contact are gold plated for optimum corrosion resistance and low contact resistance. MATERIALS: BNC: Body – Brass, Nickel Plated, Center Contact – Brass, Gold Plated. Wire: 20 AWG, Stranding 41 x 36 T.C., PVC Insulated, .087” (2,21 mm) O.D. Marking: Model 5189, Color matches Grabber. Grabber: Contact – Beryllium Copper, Gold Plated Spring – Stainless Steel Insulation – Glass Filled Nylon. Color: one red, one black RATING: Voltage: Hand-held testing: 30VAC/60VDC Max. Hands free testing in controlled voltage environments: 150 VRMS Operating Temperature: +55°C (+131°F) Max. ORDERING INFORMATION: Model 5189 Custom lengths are available, contact Pomona Technical support: 800-241-2060 ([email protected]) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094437 Page 1 of 1