Models 7042, 7043 BNC (M) Crimp 1407B 75 Ω , BNC (M) 8241 75 Ω Model 7042 BNC (M) 75 Ω Belden 1407B Model 7043 BNC (M) Belden 8241 Use for your 75 Ω broadcast cable assemblies and applications. Features • True 75 Ω BNC connector • Designed for common Belden cables (see table on page 2 for cable types and crimp die information) • Precision machined. Gold plated (15 micro– inches) contacts. Insulation material is PTFE (not delrin) Materials • Body is machined brass with tarnish resistant nickel plating. • Male center pin contacts are gold-plated (15 micro-inches) brass. High quality machined PTFE dielectric. • See page 2 for cable type, crimp information and cable assembly instructions. Specifications Nominal impedance 75 Ω Frequency 0-3 GHz VSWR 1.10 max. 0-3 GHz Center / Outer contact resistance 1.5 / 1.0 mΩ Number of insertions 500 Insulation resistance 5000 MΩ (min) Dielectric withstand voltage 1500 Vrms Ratings: Voltage: 500 Vrms Operating temperature: -85 ˚F to +131 ˚F (-65 ˚C to +155 ˚C) Max. Ordering Information Model: 7042, BNC (M) Coaxial 1407B…(75 Ω). Model: 7043, BNC (M) Coaxial Belden 8241…(75 Ω). USA: Sales: 800-490-2361 Technical Support: 800-2412060 Fax: 888-403-3360 Europe: 31-(0) 40 2675 150 International: 425-446-5500 e-mail: [email protected] Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright 2004 9/2004 2398570 D-ENG-N Rev A Page 1 of 2 Models 7042, 7043 BNC (M) Crimp 1407B 75 Ω , BNC (M) 8241 75 Ω Cable Type and Crimp Die Sizes Connector Model # 7042 7043 Cable Groups Belden 1407B, 1417B, 1164B, 1167B, 1418B, 11467B Belden 8241, 88241 Crimp Die set* Size (Hex/Pin) Model 7285 (.178 / .042) Model 7281 (.255 / .042) * For use with Pomona crimp tool Model 7277. Cable Assembly Instructions USA: Sales: 800-490-2361 Technical Support: 800-2412060 Fax: 888-403-3360 Europe: 31-(0) 40 2675 150 International: 425-446-5500 e-mail: [email protected] Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright 2004 9/2004 2398570 D-ENG-N Rev A Page 2 of 2