Model 72963 SMA JACK STRAIGHT PCB RECEPTACLE Model 72963 SMA JACK STRAIGHT PCB RECEPTACLE High bandwidth, small size, and durability for confident connections. Features • DC - 18 GHz • Meets MIL-C-39012, IEC 169-15, CECC 22110. • Small size and durability for mobile communications. • Precision machined and gold-plated for low loss. Materials • • • • Body is machined brass with gold plating. Center Contacts - Plug is gold plated brass and Jack is gold plated Beryllium copper. Insulators are high quality PTFE. Crimp Ferrules are copper with gold or nickel plating. USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com Specifications Impedance 50 Ω Frequency Range DC - 18 GHz Working Voltage < 500 Vpeak Dielectric Withstanding Voltage 1,000 Vrms VSWR 1.25 max. Center/Outer Contact Resistance 0.003/0.002 Ω max Insulation resistance > 5000 MΩ Number of Insertions 500 cycles minimum Temperature Range -65˚ C to 165˚ C, -85˚ F to 329˚ F Ordering Information Model: 72963 Description: SMA JACK STRAIGHT PCB RECEPTACLE All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2008 D2003402 REV 002 Page 1 of 1