PSC3506 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 1. Configuration & Dimensions Series PSC3506 Dimensions [mm] A(max.) 9.20 B(max.) 7.90 C(max.) 1.65 D(typ.) 6.80 E(typ.) 0.90 F(typ.) 5.06 G(ref.) 7.20 H(ref.) 1.20 2. Schematic Diagram 3. Materials a.- Core : Ferrite DR Core b.- Base : Ceramic Base c.- Adhesive : Epoxy resin d.- Wire : Enamelled copper wire (class F) e.- Terminal : MoMn / Ni / Au f.- Remark : Lead content 200ppm max. include ferrite 4. General Specification 1 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. I(ref.) 5.80 PSC3506 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com a.- Temp. rise : 40ºC max. b.- Rated current : Base on temp. rise & ∆L/L0A = 10% typ. c.- Storage temp. : -40ºC ~ +125ºC d.- Operating temp. : -40ºC ~ +105ºC e.- Resistance to solder heat : 260ºC. 10 secs 5. Electrical Characteristics PSC3506 (4.7µH – 220µH) Inductance (µH) Test Freq. L (KHz) SRF (MHz) typ. RDC (Ω) ±20% Irms (A) max. Isat (A) typ. PSC3506 – 4R7M 4.7±20% 100 65 0.125 1.50 1.40 PSC3506 – 6R8M 6.8±20% 100 55 0.160 1.40 1.30 PSC3506 – 100M 10.0±20% 100 48 0.200 1.20 1.10 PSC3506 – 150M 15.0±20% 100 35 0.300 0.90 0.90 PSC3506 – 220M 22.0±20% 100 30 0.380 0.76 0.70 PSC3506 – 330M 33.0±20% 100 22 0.530 0.68 0.62 PSC3506 – 470M 47.0±20% 100 20 0.770 0.54 0.42 PSC3506 – 680M 68.0±20% 100 16 1.100 0.42 0.38 PSC3506 – 101M 100.0±20% 100 13 1.600 0.36 0.35 PSC3506 – 151M 150.0±20% 100 11 2.500 0.28 0.28 PSC3506 – 221M 220.0±20% 100 9 3.900 0.24 0.24 DWG No. [Inductance tested at 0.1V] [Irms base on temp. rise 40ºC] [Isat base on ∆L/L0A = 10%] 6. Curve Inductance VS. DC Current Curve 2 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSC3506 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com PSC3506 7. Packaging Information P: 12mm 4mm 3 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSC3506 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com Leader no component 200 mm min. Components Trailer no component 400 mm min. User direction of feed Style 07 – 16 Series PSC3506 Dimensions [mm] A 178 B 21±0.8 C 13 D 16 G 18+0 Inner : Reel Q’TY(pcs) 600 G.W.(gw) 250 N 50-0 T 20.5 Outer : Carton Style 07 – 16 Q’TY(pcs) 18,000 G.W.(Kg) 8.5 Size(cm) 42 x 41 x 24 8. Labelling 9. Reliability Test Test item Solderability Specification More than 90% of the terminal electrode shall be covered with fresh solder Test condition Preheat : 150±25% for 60 seconds Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent Solder temp. : 235±5ºC Flux : Rosin Dip time : 4±1 seconds 4 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSC3506 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com Thermal shock test (Temp. cycle) Inductance shall not change more than ±20% Room temp. 15 minutes -25±2ºC 30 minutes Room temp. 15 minutes 85±2ºC 30 minutes Total : 50 cycles Humidity Resistance test High temp. Resistance test Temperature : 40±2ºC Humidity : 90 ~ 95% Applied current : Per specifications Time : 500 hours Temperature : 105±2ºC Applied current : Per specifications Time : 500 hours 10. Edition Control Edition 1st Date 31/08/06 Change description Update Specification Made by Pablo Pozo 5 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation.