P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL16 Series 5mm (T1¾) Ultra Bright Pure Green LED Features Absolute Maximum Ratings at TA = 25°C *Popular T1 3/4 Lens style with Flange *High Intensity *Ultra High Light Output *Moderate Viewing Angle *Integrated Zener Diode for better ESD Protection *RoHS Compliant Power Dissipation ……………………………………………………………………………..... 72mW Reverse Voltage (<100µA)……..……………...……………………………….…………………... 5.0V Max Forward Current ………………………………………………...………………….……… 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)...………..….……………….………….. 100mA Operating Temperature Range ………………………………………...…..………….. -25°C to +85°C Storage Temperature Range..………….…………………………...……….……...… -40°C to +100°C Soldering Temperature (1.6mm below body)....…………………………………….…..…….…. 260°C for 5 seconds Electrostatic Discharge……………………………………………………………………….… 6000V Electrical & Optical Characteristics at TA = 25°C Emitting Color Part Number Chip Material Dominant Wave Length Peak Wave Length Viewing Angle 2θ ½ nm nm Deg Typ Max Min Typ 525 — 30° 3.2 4.0 1400 3800 Water Clear Lens PL16F-WCG11Z Pure Green InGaN Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1mm down the leads. 8.7 24.0Min. 5.0 2.54 ±0.1 Anode 0.5 Square 1.5typ. 5.9 1.0 10.06.06 Rev 0 RS