P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL303A Series 3mm LED Right Angle Holder Features Absolute Maximum Ratings at TA = 25°C *Right Angle PCB Indicator *Dual Locating Pins provide stability during soldering *Stand-off prevents Flux entrapment *Housing Material Black Nylon UL94V-2 *1 Green LED with Color Diffused Lens used *6.4mm from PCB to Center of LED *RoHS Compliant Power Dissipation…………………………………………………………………. 78mW Reverse Voltage (<100 µA)……...…...…….…………………………………………. 5.0V Max Forward Current…………..………………….……..…………….……....….. 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)…………………...….…… 100mA Operating Temperature Range……………….………………….…….… -25°C to +85°C Storage Temperature Range……………….……………….…..…….… -40°C to +100°C Soldering Temperature (1.6 mm below body)………....………………….. 260°C for 5 seconds Electrical & Optical Characteristics at TA = 25°C Part Number Emitting Color Chip Material Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm 567 572 Color Diffused Lens PL303A-1G13 Green GaP Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) Deg Typ Max Min Typ 55° 2.1 2.6 9.0 17.0 All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. 4.6 3.4 4.6 2.9 8.7 6.4 0.508 2.54 1.0 0.5 3.5 1.0 3.6 2.54 2.54 Ø1.09 2.54 Ø1.2 Recommended PCB Layout 11-02-06 Rev 0 RS