P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL321 Series 3mm LED Panel Mount Metal Holder Features Absolute Maximum Ratings at TA = 25 °C *Panel Mount Indicator with Outer Reflector *Chrome or Black Finish *Mounting Hole 6 mm (0.236”) *Mounting Hardware Included *1 Green LED with Color Diffused Lens used *26AWG Red (+) and Black (-) 6” Wire Leads *RoHS Compliant Power Dissipation…………………………………………………………………. 78mW Reverse Voltage (<100µA)…………………….……………………………………… 5.0V Max Forward Current…….…………..………………….……..……….…………. 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)……........…….……...…… 100mA Operating Temperature Range……………………………………..……. -25°C to +85°C Storage Temperature Range……………….....………………….…...… -40°C to +100°C Soldering Temperature (1.6 mm below body)………....……………..….….. 260° for 5 seconds Electrical & Optical Characteristics at TA = 25 °C Part Number Add S for Chrome Finish Add B for Black Finish Emitting Color PL321-1G13-2 Chip Material Green Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm 567 572 GaP Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) Deg Typ Max Min Typ 34° 2.1 2.6 18.0 40.0 All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. 3mm LED 2.3 6.0 3.7 2.0 6.35 Cathode Black 8.0 Striped and Tinned Anode Red 1.3 Washer 4.65 M6 x 0.75 152.0 Typ. 02-16-07 REV 0 RS