P-TEC PL520-1Y01-2

P-tec Corp.
Tel:(800)688-0613
2405 Commerce Circle Tel:(719) 589 3122
Alamosa Co. 81101
Fax:(719) 589 3592
www.p-tec.net
[email protected]
PL520 Series 5mm LED Snap-in Panel Mount Holder
Features
Absolute Maximum Ratings at TA = 25 °C
*Snap-in Design Requires no Hardware
*Mounting Hole 6.35 mm (0.25”)
*Housing Material Black Nylon UL94V-2
*1 Yellow LED with Color Diffused
Lens used
*26AWG 6” (+) Red and (-) Black Wire
Leads
*RoHS Compliant
Power Dissipation……………………………………………………………….... 78mW
Reverse Voltage (<100µA)….………………..……...…...…….………………….…. 5.0V
Max Forward Current…….…………..………………….……..…………………. 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)……........…………….….. 100mA
Operating Temperature Range……………………………………….…. -25°C to +85°C
Storage Temperature Range……………….....……………………….. –40°C to +100°C
Soldering Temperature (1.6 mm below body)………....………………….... 260° for 5 seconds
Electrical & Optical Characteristics at TA = 25 °C
Part Number
Emitting
Color
Chip
Material
Peak
Wave
Length
Dominant
Wave
Length
Viewing
Angle
2θ ½
nm
nm
585
590
6” Wire Leads
PL520-1Y01-2
Yellow
GaAsP
Forward
Voltage
@20mA (V)
Luminous
Intensity
@20mA (mcd)
Deg
Typ
Max
Min
Typ
30°
2.1
2.6
13.0
33.0
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified.
Side
Front
0.8
3.9±0.5
4.8
Locking Shims (Tapered)
13.2
Cathode Black
6.4
7.32
6.05 Min. 6.17 Max.
Striped and Tinned
Anode Red
3.8
152 Typ.
02-15-07 Rev 0 RS