Displays AND104SLD-HB 800 x 600 Pixels LCD Color Monitor The AND104SLD-HB is a compact full color TFT LCD module, whose driving board is capable of converting composite video signals to the proper interface of LCD panel and is suitable for car TV, portable DVD and GPS, multimedia applications and other AV systems. This device consists of amorphous silicon TFT liquid crystal display with B/L unit. The display has 1440 x 234 pixels on a 7.0 inch diagonal screen. X and Y drivers, LSI controller, and a built-in CCFL backlight inverter (with optional board.) Features • Pixel in stripe configuration • 10.4 inch (26.4 cm) diagonal screen • High brightness 2-CCFL backlight (350 Nits) • Slim and compact, designed for O/A application • Amorphous silicon TFT-LCD with B/L unit • Display Colors: 262,144 colors • +3.3V DC supply voltage for TFT LCD panel driving • Wide viewing angle • RoHS compliant Mechanical Characteristics Item Specification Screen Size Unit 10.4 inch (26.4 cm) diagonal – Display Format 800 x (R, G, B) x 600 dot Display Colors 262,144 – Active Area 211.2 (H) x 158.4 (V) mm Pixel Pitch 0.264 (H) x 0.264 (V) mm Stripe – 243 (W) x 185.1 (H) x 10.5 (D) (typ.) mm 475 ± 20 g Backlight CCFL, 2-CCFL – Surface Treatment Anti-glare and Wide View Film – Normally White – 12 o’clock – Pixel Configuration Outline Dimensions Weight Display Mode Gray Scale Inverstion Direction Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 11/24/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 1 Displays AND104SLD-HB TFT-LCD Optical Characteristics Item Symbol Viewing Angle Contrast Ratio Response Time Min. θ Horizontal Vertical Conditions θ (to 12 o’clock) θ (to 6 o’clock) CR Rise TR Fall Tf CR ≥ 10 Optimum direction θ = 0º / ϕ = 0º Specifications Typ. Max. Units ±55 ±60 – deg 50 55 – deg 35 40 – deg 200 400 – – – 15 50 ms – 25 50 ms Uniformity U – 55 80 – % Luminance L θ = 0º / ϕ = 0º 300 350 – + 25 º C 0.30 0.34 – 50,000 0.33 0.37 – – 0.36 0.40 3.5 – cd/m2 – – % hrs x y CTK – White Chromaticity Cross Talk Ratio Lamp Life Time Input Terminals: TFT-LCD Panel Driving - Connector type: MOLEX 53779-1470 11/24/08 Pin # Symbol Description 1 VDD Power supply: +3.3V 2 VDD Power supply: +3.3V 3 GND Ground 4 GND Ground 5 IN0- Pixel Data Transmission Pair 0 (negative -) 6 IN0+ Pixel Data Transmission Pair 0 (positive +) 7 IN1- Pixel Data Transmission Pair 1 (negative -) 8 IN1+ Pixel Data Transmission Pair 1 (positive +) 9 IN2- Pixel Data Transmission Pair 2 (negative -) 10 IN2+ Pixel Data Transmission Pair 2 (positive +) 11 CLK- Sampling Clock (negative -) 12 CLK+ Sampling Clock (positive +) 13 GND Ground 14 GND Ground Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 2 Displays AND104SLD-HB Electrical Characteristics - Recommended Operating Conditions GND=0V, Ta=25ºC Item Symbol Min. Typ. Max. V Supply Voltage 3.0 3.3 3.6 DD Unit Remarks V Current Dissipation IDD – 190 380 LVDS Differential Input High Threshold VTH – – 100 LVDS Differential Input Low Threshold VTL -100 – – Lamp Current IFL 6.0 14.0 16.0 mS Note 3, Note 5 Lamp Voltage VL 420 475 530 Vrms Note3, IL = 14mA Starting Voltage (25ºC) (Reference Value) VS – – 810 Vrms Note 4 Starting Voltage (0ºC) (Reference Value) VS – – 1080 Vrms Starting Voltage (-20ºC) (Reference Value) VS – – 1125 Vrms Lamp Driving Frequency FL 20 50 80 KHz Lamp Power Consumption – 5.88 6.65 7.42 W mA Note 1 mV Note 2 Note 5, IL = 14mA Note 1: To test the current dissipation of VDD, using the “color bars” testing pattern shown below: IDD current dissipation testing pattern Note 2: This LCD module conforms to LVDS standard. Note 3: The backlight driving waveform should be as close to sine-wave as possible. In order to satisfy the quality of B/L, no matter the kind of inverter, the output lamp current must be between Min. and Max. to avoid the abnormal display image caused by B/L. Note 4: The “Max. of starting voltage” means the minimum voltage of inverter to turn on the CCFL and it should be applied to the lamp for more than 1 second to start up. Otherwise the lamp may not be turned on. Note 5: Lamp current is measured with current meter for high frequency as shown below: Lamp current dissipation testing configuration Note 6: The life time is determined as the time at which brightness of lamp is 50% compare to that of initial value at the typical lamp current. 11/24/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 3 Displays AND104SLD-HB LVDS Interface Block Diagram Backlight Driving - Connector Type: BHR-03VS-1 of Japan Solderless Terminal MFG Co., LTD Pin No. Symbol Description Remarks 1 LV Ground White 2 HV Lamp Power Input Pink ( or Gray) 3 HV Lamp Power Input Pink (or Gray) Backlight Absolute Maximum Ratings GND=0V, Ta=25ºC Parameters Symbol Min. Max. Unit Supply Volate VDD -0.3 +4.0 V Backlight Driving Voltage VL – 2000 V Backlight Driving Frequency FL 20 80 KHz Blcok Diagram 11/24/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 4 Displays AND104SLD-HB Timing Specifications Item Symbol Frame Cycling t1 Vertifcal Display Period t2 Horizontal Scanning Time t3 Horizontal Display Period Clock Cycle Min. Typ. Max. Unit 604 x t3 628 x t3 800 x t3 – ms – 16.58 – 600 x t3 600 x t3 600 x t3 920 x t5 1056 x t5 1064 x t5 – 26.4 – t4 800 x t5 800 x t5 800 x t5 t5 – 25.0 – ns Clock High Level Time t6 9.0 – – ns Clock Low Level Time t7 9.0 – – ns Hold time t8 4.0 – – ns Setup time t9 5.0 – – ns us Pixel Arrangement - The LCD module pixel arrangement is the stripe. 11/24/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 5 Displays AND104SLD-HB Dimensional Outline General mechanical toleranc = 0.5mm 11/24/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 6