AND208SGA Standard Bright LED Lamps Weight: 0.38 g Unit: mm 208S 4.0 ± 0.2 5.0 ± 0.2 9.7 ±0.2 4.0 ± 0.2 2.0 ± 0.2 Dual Color 2mm x 5mm Rectangular Features 1 Max • All plastic mold type • Low drive current, (forward current = 10 – 15 mA) • Fast response time, capable of pulse operation • Viewing Angle: 110° 24.5 Min 0.5 Common Cathode 4.0 Typ AND208SGA • RoHS Compliant Optical Characteristics (T = 25°C) 2.0 Typ 2.54 2.54 Green Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Part Number Red AND208SGA Color Lens Desc. Source GaAsP/GaP GaP Emitting Lens Red White Green White Luminous Intensity @ 20 mA (mcd) Min. Typ. Diffused 8 14 Diffused 8 14 Absolute Maximum Ratings (TA = 25°C) Rating Symbol GaAsP/GaP (Red) GaP (Green) Unit Forward Current IF 30 25 mA Reverse Voltage VR 5 5 V Power Dissipation PD 105 105 Total Package Characteristics Operating Temperature TOpr -40 to +85 °C Storage Temperature Range TStg -40 to +85 °C Electro-Optical Characteristics (TA = 25°C) Rating Characteristics Symbol GaAsP/GaP (Red) Test Condition GaP (Green) Unit Typ. Max. Typ. Max. Forward Voltage VF IF = 20mA 2.0 2.5 2.2 2.5 V Reverse Current IR VR = 5 V – 10 – 10 µA Peak Emission Wavelength λp IF = 20mA 625 – 565 – nm Spectral Line Half Width λ IF = 20mA 45 – 30 – nm Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07 AND208SGA Dual Color Standard Bright LED Lamps IV vs. IF 5 Red TA = 25°C Forward Current IF (mA) Relative Luminous Intensity IV 30 2 1 0.5 0.2 20 10 5 3 2 0.1 1 20 2 5 10 Forward Current IF (mA) 1 1.7 50 IV vs. IF 5 1.9 2.0 2.1 Forward Voltage VF (V) 2.2 2.3 2.2 2.3 IF vs. VF 50 30 2 1 0.5 0.2 TA = 25°C 20 10 5 3 2 0.1 1 1.8 Green Green Forward Current IF (mA) Relative Luminous Intensity IV IF vs. VF Red 50 2 5 10 20 Forward Current IF (mA) 50 1 1.7 1.8 1.9 2.0 2.1 Forward Voltage VF (V) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07 AND208SGA Dual Color Standard Bright LED Lamps IV vs.TA Allowable Forward Current IF (mA) IV vs. TC Relative Luminous Intensity IV 3 2 1 Gree Re n d 0.5 0.4 0.3 -20 0 20 40 60 Case Temperature TC (°C) 40 Green/Red 30 20 10 0 0 80 20 40 60 80 100 Ambient Temperature TA (°C) Relative Luminous Intensity vs. Wavelength TA = 25° Red 0.8 Green Relative Luminous Intensity 1.0 0.6 0.4 0.2 0 520 540 560 580 600 620 640 660 680 Wavelength (nm) 700 720 740 760 780 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 800 7/18/07