AND4OA Ultra Bright LED Lamps: Type 2 Weight: 2.0 mg Unit: mm AND4OA Cathode Index 1.1 1.25 InGaAlP Ultra Bright Orange Light Emission Surface Mount Package Features 1.4 2.0 0.6 • RoHS Compliant • Small package size • 2.0 (l) x 1.25 (w) x 1.1 (h) size • Suitable for DIP and REFLOW soldering • Recommended Forward Current: 10 mA 0.4±0.2 Maximum Ratings (Ta = 25°C) Polarity Characteristics Symbol Rating Unit Forward Current IF 25 mA Reverse Voltage VR 4 V Power Dissipation PD 62.5 mW Operating Temperature Range TOpr -30 to 85 °C Storage Temperature Range TStg R0.2 -30 to 85 °C Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Minimum Typical Forward Voltage VF IF = 20 mA – 2.0 2.8 V Reverse Current IR VR = 4 V – – 100 µA Luminous Intensity IV IF = 20 mA 27 60 – mcd Peak Emission Wavelength lP IF = 20 mA – 612 – nm Spectral Line Half Width ∆λ IF = 20 mA – 15 – nm Dominant Wavelength λd IF = 20 mA – 605 – nm Full Viewing Angle θ IV = 1/2 Peak – 140 – degree Precaution Please be careful of the following: 1. Manual soldering: maximum temperature of iron tip: 260°C max. Soldering time: within 5 sec. per solder-land Soldering portion of lead: up to 1.6 mm from the body of the device 2. Reflow solder: recommended condition is as follows: Time Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Dip 1.75 Reflow 1.1 Temperature 230°C max. more than 2 min. Unit The following soldering patterns are recommended for reflow and dip soldering 10 sec. max. 140 - 160°C Maximum 4°C/sec. max. 1.25 1.1 1.25 1.25 1.1 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 1.25 6/12/07 AND4OA InGaAlP Ultra Bright Orange Light Emission IV – IF IF – VF 100 Ta = 25°C 50 Ta = 25°C Luminous Intensity IV (mcd) Forward Current IF (mA) 50 30 Ultra Bright LED Lamps: Type 2 10 5 3 30 10 5 3 1 1 1.5 1.6 1.7 1.8 1.9 2.0 2.1 1 2.2 3 Forward Voltage VF (V) 100 Relative Luminous Intensity – Wavelength IV – TC 3 1.0 Relative Luminous Intensity Relative Luminous Intensity 10 5 30 50 Forward Current IF (mA) 1 0.5 0.3 0.1 -20 0 20 40 60 IF = 20 mA Ta = 25°C 0.8 0.6 0.4 0.2 0 570 80 590 610 630 650 670 Wavelength λ (nm) Case Temperature TC (°C) Radiation Pattern IF – Ta 20° 10° 0° 10° Ta = 25°C 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° Allowable Forward Current IF (mA) 40 30 20 10 90° 90° 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (°C) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 100 6/12/07