AND6BC Ultra Bright LED Lamps Weight: 2.0 mg Unit: mm AND6BC InGaN Ultra Bright Blue TOP LEDs Features • RoHS Compliant • P-LCC-2 package with optical indicator • Compatible with automatic placement equipment • Suitable for infrared reflow, vapor phase reflow, and wave solder processes • Wide viewing angle • Low (2mA) current operation • Inter reflector • Ideal for (LCD) backlight and pipe applications • Pb-Free, RoHS Maximum Ratings (Ta = 25°C) Characteristics Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Forward Current Reverse Voltage Power Dissipation Operating Temp. Range Storage Temp. Range Electrostatic Discharge Peak Forward Current (Duty 1/10 @ 1Khz) Symbol Rating Unit IF 30 mA VR 5 V PD 130 mW TOpr -40 to 85 °C TStg -40 to 100 °C ESD 1000 V IFP 100 mA Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Symbol Test Condition Minimum Typical Maximum Unit VF IF = 20 mA 2.7 3.2 3.7 V IR VR = 5 V – – 50 µA IV IF = 20 mA 57 85 112 mcd lP IF = 20 mA – 468 – nm ∆l IF = 20 mA – 26 – nm ld IF = 20 mA – 470 – nm 2 θ 1/2 IF = 20 mA – 120 – degree Precaution Please be careful of the following: 1. Manual soldering: maximum temperature of iron tip: 260°C max. Soldering time: within 5 sec. per solder-land Soldering portion of lead: up to 1.6 mm from the body of the device 2. Reflow solder: recommended condition is as follows: 3. Absolute secure counter measures against static electricity and surge should be taken when handling these proucts. It is recommended to use wrist band or antistatic gloves when handling these LEDs. Temperature 10 sec. max. 140 - 160°C 230°C max. more than 2 min. 4°C/sec. max. Time Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 7/18/07 AND6BC InGaN Ultra Bright Blue TOP LEDs Ultra Bright LED Lamps IF – VF IV – IF 50 1000 Luminous Intensity IV (mcd) Ta = 25°C Forward Current IF (mA) 40 30 20 100 10 10 2.0 3.0 2.5 3.5 1 4.0 3 4.5 10 5 30 50 Forward Current IF (mA) 100 Forward Voltage VF (V) Relative Luminous Intensity – Wavelength IV – TC 1000 1.0 IF = 20 mA Ta = 25°C Relative Luminous Intensity Relative Luminous Intensity Ta = 25°C 100 10 1 0.8 0.6 0.4 0.2 0 -20 0 20 40 80 60 350 Case Temperature TC (°C) Radiation Pattern 400 500 450 550 Wavelength λ (nm) 600 IF – Ta 20° 10° 0° 10° Ta = 25°C 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° Allowable Forward Current IF (mA) 40 30 20 10 90° 90° 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (°C) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 100 7/18/07