REVISION DESCRIPTION REV. DATE APPROVED TAPE 1830 ± 50 C5 C4 140 ± 20 P1 11 10 2 3 C2 4 5 6 7 8 24 8 17 1 17 2 16 1 9 8 C1 C3 1 3 1 24 8 16 3.8 ± 0.3 9 FRONT 3.8 ± 0.3 DVI (24+5)P/M ASS’Y TYPE C1 C3 C2 C4 DVI (24+5)P/M ASS’Y TYPE C5 P2 FRONT PIN OUT P1 P2 WHITE ORANGE DRAIN DRAIN 1 2 3 4 5 WHITE BROWN 4 5 9 10 11 WHITE BLACK DRAIN DRAIN 12 13 WHITE BLUE 1 2 3 9 10 11 12 13 P2 P1 6 7 WHITE YELLOW 6 7 17 18 19 WHITE YELLOW DRAIN DRAIN 17 18 19 20 21 WHITE GREEN 20 21 C1 C5 C2 C5 C3 C5 C4 22 DRAIN 22 23 24 WHITE RED 23 24 P1 8 14 15 16 SHELL P2 RED GREEN BLUE YELLOW BLUE RED BLACK BROWN BRAID C1 C5 C2 C5 C3 C5 C4 8 14 15 16 SHELL NOTES: 1. CABLE: UL20276 [(28AWGx1P+DW+FOIL)x7+(28AWG+SP+FOIL)x3+28AWGx5C+28AWGx1P+MYLAR+FOIL+BD]x1 OUTER JACKET COLOR: BEIGE, OD: 9.5 ± 0.3mm PRINTING: “E166307 AWM 20276 28AWG 80°C 30V VW-1 LOW VOLTAGE COMPUTER CABLE” 2. CONNECTORS: DVI (24+5)P/M - DVI (24+5)P/M 3. HOOD: ASS’Y TYPE, COLOR: BEIGE 4. CABLE ELECTRICAL TEST: <1>.100% OPEN SHORT & MISS WIRE TEST <2>. INSULATION RESISTANCE: DC400V 10M ohm MIN. <3>. CONDUCTOR RESISTANCE: 3 ohm MAX. 5. PACKING: 1PC/POLYBAG No. SPECIFICATION STANDARD PARTS NAME QTY REMARKS 1 DVI (24+5)P/M - CONTACT BRONZE/GOLD PLATED SOLDER TYPE 58 2 DVI (24+5)P/M - INSULATOR THERMOPLASTIC/BLACK UL94V-0 2 3 DVI (24+5)P/M - SHELL NICKEL PLATED 2 4 DVI (24+5)P/M -CAN STEEL TIN PLATED 2 5 COPPER FOIL WIDTH: 15mm 2 6 DVI (24+5)P/M - COVER 45P PVC/COLOR: BEIGE 2 7 THUMB SCREW #4-40 2.8x45, NICKEL PLATED 4 8 SCREW - MOLD 35P PVC/COLOR: BEIGE 4 9 CABLE DVI 24+5 UL20276 KL03009ABK01A 1 10 MINI TIE PE/BLACK 2 11 POLYBAG PE/0.08x180x220mm 1 Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 Qualtek Electronics Corp. WCI DIVISION Part Number: 1321020-06 Description: DVI(24+5)P/M - DVI(24+5)P/M 18-50 0.50 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B. Grubb 01-03-07 01-03-07 JJH / 01-03-07