REVISION DESCRIPTION REV. DATE APPROVED 915 ± 30 1 P1 2 4 5 6 3 7 4 3 2 1 BLUNT CUT 12.2 ± 0.4 FRONT USB 4P(A) MOLDED TYPE (MOLD NO: G102-506) PIN OUT TAPE P1 100 ± 20 BLUNT CUT 15 14 1 RED 2 GREEN 3 4 SHELL No. SPECIFICATION STANDARD PARTS NAME QTY REMARKS 1 USB 4P(A)/M - CONTACT BRASS / GOLD PLATED (CRIMPING TYPE) 4 WHITE 2 USB 4P(A)/M - INSULATOR PBT+G,F / WHITE UL94V-0 1 BLACK 3 USB 4P(A)/M - SHELL 1 STEEL NICKEL PLATED 1 4 USB 4P(A)/M - SHELL 2 STEEL NICKEL PLATED 1 5 USB 4P(A)/M - COPPER FOIL WIDTH: 5xLENGTH 27 1 6 USB 4P(A)/M - OUTER MOLD 45P PVC / COLOR: BLACK 1 7 CABLE KL01103ABK01A 1 8 MINI TIE PE / BLACK 2 9 POLY BAG PE / 0.08x140x160 1 DRAIN BRAID NOTES: 1. CABLE: UL2725 28/28AWG (28AWGx1P+28AWGx2C+FOIL+DW+BD)x1 OUTER JACKET: BLACK, OD: 4.0 ± 0.2mm PRINTING: “E166307 AWM 2725 28AWG 80˚C 30V VW-1 HI-SPEED USB 2.0” 2. CONNECTORS: USB 4P(A) MALE TO OPEN 3. HOOD: MOLDED TYPE 4. ELECTRICAL TEST: <1>.100% OPEN SHORT & MISS WIRE TEST <2>. INSULATION RESISTANCE: DC400V 10M ohm MIN. <3>. CONDUCTOR RESISTANCE: 3 ohm MAX. 5. PACKING: 1PC/POLYBAG Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 Qualtek Electronics Corp. WCI DIVISION Part Number: Description: 3021005-03 USB 4P(A)/M - BLUNT CUT 18-50 0.50 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B. Grubb 01-26-07 01-26-07 JJH / 01-26-07