Part No. DP0V-100PSIG-M DP0V (100 psi / 7 bar) pump, 100 psi analog gauge Pump and pressure gauge combination includes everything needed to perform accurate, precise low pressure calibrations Features • Light weight, compact pump generates up to 100 psi (7 bar) with ease • Large volume fine adjustment piston provides precise control, even at very low pressures • Modular design makes field maintenance quick and easy • Precisely vent pressure with soft seated bleed valve • Two outlet ports provide connections for both pressure reference and for device under test thus eliminating a tee • Low volume Quick-test hose, gauge adapter and process connection can be attached to pump without thread sealant or a wrench • Rugged, all metal construction reduces pressure changes due to temperature fluctuations • Made in U.S.A. Item Includes • Hand Pump - DP0V Assembly (DP0V) • Gauge - 0-100 psig Analog Test Gauge (GAUG-0100) • Gauge Adapter - 1/4" female NPT x female QT, no check-valve, brass (QTHA-2FBA) • Hose - Quick-test hose, brass hose ends, 3 ft (92 cm) long (QTQT-HOS-3ft) • Hose Adapter - 1/4" male NPT x male QT, no check-valve, brass (QTHA-2MB0) Specifications Pressure Range 0 to 100 psi (0 to 7 bar) Gauge Pressure Range 0 to 100 psig Media Air Outlet Port1 Male Quick-test, brass Outlet Port2 Male Quick-test with cap and chain, brass Temperature Range 0 to 130 °F (-18 to 54 °C) Gauge Temperature Range -40 to 140 °F (-40 to 60 °C) Construction Anodized Aluminum, Brass, Stainless Steel Seal Materials Buna-N, Delrin, Teflon Fine Adjust Resolution ±0.01 psi Weight 2.78 lb (1.3 kg) DP0V-100PSIG-M Dimensions H: 9.75 in (24.765 cm) x W: 7.93 in (20.1422 cm) x D: 2.9 in (7.366 cm) Ralston Instruments Inc. | ralstoninst.com | Toll Free 800-347-6575 | Phone 440-564-1430 | Fax 440-564-1480