CDL13007 TO-220 PLASTIC PACKAGE NPN PLASTIC POWER TRANSISTOR Used in Energy Saving Lights and Power Switch Circuits ABSOLUTE MAXIMUM RATINGS DESCRIPTION Collector Base Voltage Collector Emitter Voltage Emitter Base Voltage Collector Current Continuous Power Dissipation upto Ta=25ºC Power Dissipation upto Tc=25ºC Operating and Storage Junction Temperature Range SYMBOL VCBO VCEO VEBO IC PD PD VALUE 700 400 9 8 2 80 UNIT V V V A W W Tj, Tstg - 55 to +150 ºC ELECTRICAL CHARACTERISTICS (Tc=25ºC unless specified otherwise) DESCRIPTION SYMBOL TEST CONDITION ICBO VCB=700V, IE=0 Collector Cut Off Current IEBO VEB=9V, IC=0 Emitter Cut Off Current *h I =2A, VCE=5V (Note1) DC Current Gain FE C Ratio Between hFE1 of Low Current and hFE1 IC=5mA, VCE=5V hFE1/hFE2 hFE2 IC=2A, VCE=5V hFE2 of High Current *VCE (sat) IC=5A, IB=1A Collector Emitter Saturation Voltage *VBE (sat) IC=5A, IB=1A Base Emitter Saturation Voltage fT VCE=10V, IC=500mA, f=1MHz Transition Frequency Switching Time DESCRIPTION Fall Time Storage Time SYMBOL tf ts TEST CONDITION IC=2A, IB1= -1B2=0.4A VCC=120V *hFE Classification A : 08 - 17 Marking Product is pre-selected in DC Current Gain (Groups A to E). RECTRON reserves the right to ship any of the group(s) to customers depending on production availability. CDL 13007A XX XX=date code *Pulse test tp <300m ms, duty cycle <2% B : 16 - 25 CDL 13007B XX MIN TYP 8 MAX 1.0 1.0 40 UNIT mA mA 1.5 1.5 V V MHz MAX 0.8 3.6 UNIT ms ms 0.75 4 MIN TYP C : 24 - 33 E : 32 - 40 CDL 13007C XX CDL 13007E XX TO-220 Plastic Package B C E DIM MIN MAX A 14.42 16.51 9.63 10.67 B 3.56 4.83 C — 0.90 D 1.15 1.40 E F 3.75 3.88 2.29 2.79 G 3.43 2.54 H — J 0.56 12.70 14.73 K L 2.80 4.07 2.03 2.92 M — 31.24 N O 7 DEG All diminsions in mm. K L N 0 0 A H F 1 2 3 D J M G 4 1 2 Pin Configuration 1. Base 2. Collector 3. Emitter 4. Collector 3 TO-220 Tube Packing Label 536.00 End Pin ±1.5 13.74 DEVICE NAME 32.85 Sr. QTY. 50 Pcs./Tube A ll Dimensions in mm 6.87 Tube Thickness Label 92.0 AMMO PACK SIZE .00 538 75. 0 Packing Detail PACKAGE STANDARD PACK Details TO-220 /FP Net Weight/Qty 200 pcs/polybag 396 gm/200 pcs 50 pcs/tube 120 gm/50 pcs 20 Tubes/Ammo Pack 1000 Pcs./Ammo Pack INNER CARTON BOX OUTER CARTON BOX Size Qty Size 3" x 7.5" x 7.5" 3.5" x 3.7" x 21.5" 1.0K 1.0K 17" x 15" x 13.5" 19" x 19" x 19" Qty Gr Wt 16.0K 10.0K 36 kgs 29 kgs DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.