DTC114YCA SOT-23 DIGITAL TRANSISTOR TRANSISTORS(NPN) FEATURES * Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors. * The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. SOT-23 * Only the on/off conditions need to be set for operation marking device design easy. MECHANICAL DATA * * * * * 0.055(1.40) 0.047(1.20) Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.008 gram 0.006(0.15) 0.003(0.08) 0.043(1.10) 0.035(0.90) f 0.022(0.55) 0.100(2.55) 0.089(2.25) 0.020(0.50) 0.012(0.30) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.079(2.00) 0.071(1.80) O Ratings at 25 C ambient temperature unless otherwise specified. (2) 0.004(0.10) 0.000(0.00) (1) (2) (3) 0.118(3.00) 0.110(2.80) (1) (1) IN (2) GND (3) OUT (3) Dimensions in inches and (millimeters) MAXIMUM RATINGES ( @ TA = 25oC unless otherwise noted ) RATINGS SYMBOL LIMITS UNITS Supply voltage VCC 50 V Input voltage VIN -6~+40 V IO 70 IC(MAX) 100 Power dissipation PC 200 Junction temperature Tj 150 Tstg -55 ~+150 Output current Storage temperature mA mW o C o C o ELECTRICAL CHARACTERISTICS ( @ TA = 25 C unless otherwise noted ) CHARACTERISTICS SYMBOL MIN TYP MAX Input voltage (VCC= 5V, IO= 100mA) VI(off) - - 0.3 Input voltage (VO= 0.3V, IO= 1mA) VI(on) 1.4 - - Output voltage (IO / II= 5mA / 0.25mA) Vo(on) - - 0.3 V II Input current (VI= 5V) UNITS V - - 0.88 mA Io(off) - - 0.5 mA GI 68 - - - Input resistance R1 7 10 13 KW Resistance ratio R2 / R1 3.7 4.7 5.7 - fT - 250 - MHz Output current (VCC= 50V,VI= 0) DC current gain (VO= 5V,IO= 5mA) Transition frequency (VO= 10V,IO= 5mA, f= 100MHz) NOTE: "Fully ROHS compliant", "100% Sn plating (Pb-free)". 2006-3 RATING AND CHARACTERISTICS CURVES (DTC114YCA) 100 20 10 O Ta= -40 C O 25 C O 100 C 5 2 VCC= 5V 5m IO, OUTPUT CURRENT (A) VI(on), INPUT VOLTAGE (V) 10m VO= 0.3V 50 1 500m 2m 1m 500m O Ta= 100 C O 25 C O -40 C 200m 100m 50m 20m 10m 5m 200m 2m 100m 100m 200m 500m 1m 2m 5m 10m 20m 1m 50m 100m 0 0.5 IO, OUTPUT CURRENT (A) Figure1 Input voltage vs. output current (ON Characteristics) Gi, DC CURRENT GAIN 200 100 O Ta= 100 C O 25 C O -40 C 20 10 5 2 100m 200m 500m 1m 2m 5m 10m 20m IO, OUTPUT CURRENT (A) 200m 3.0 O Ta= 100 C O 25 C O -40 C 100m 50m 20m 10m 5m 2m 1m 100m 200m 500m 50m 100m Figure3 DC current gain vs. output current IN 2.5 IO / II= 20 500m 50 1 2.0 Figure2 Output current vs. input voltage (OFF Characteristics) 1 VO= 5V 500 1.5 VI(off) , INPUT VOLTAGE (V) VO(on) , OUTPUT VOLTAGE (V) 1K 1.0 1m 2m 5m 10m 20m IO, OUTPUT CURRENT (A) 50m 100m Figure4 Output voltage vs. output current OUT R1 R2 GND IN OUT GND Figure5 Equivalent circuit DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.