Active Up Mixer MO4Q Product Features Application • Integrated Monolithic GaAs MESFET • Active Mixer Packages Module • Pb-free 3mm 16-pin QFN package • Lower Manufacturing Cost • Higher Productivity and Reliability • Very Low Noise Figure & Low Distortion • Repeater • Base Station Package Type: QFN-3 Description The IC operates from a positive +5V rail consuming 130 mA of current while only requiring a 2 dBm LO drive. The MCM is implemented with reliable and mature GaAs MESFET technology. (Operating Temperature: -30°C~+80°C) Specifications RF LO IF Conversion Frequency Frequency Frequency Gain (MHz) (MHz) (MHz) (dB) 1850 1780 1950 1880 2140 2070 2160 2090 70 OIP3 LO to IF IF to RF Leakage Leakage (dBm) (dBm) (dBm) 6 24 -15 -60 5V/130mA 6 24 -15 -60 5V/130mA 6 24 -15 -60 5V/130mA 6 24 -15 -60 5V/130mA Vdd/Idd Package Dimensions (Type :QFN3) Functional Pin Layout Pin No. 1 2 3 4 5 6 7 8 Function IFN In NC IF In NC CUR Ground Ground Bias Functional Diagram Pin No. 16 15 14 13 12 11 10 9 Function 14 IF INPUT 3 RFN Out NC RF Out Ground Bias NC LO_In LON_In 16 10 RF OUTPUT LO INPUT ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 8.01 Active Up Mixer MO4Q Application Schematic - IMT Bias +5V C7 100pF C1 100nF R1 13K RF Output 1 R4 0 2 Chip Balun TDK 3 HHM1516 6 NC 5 GND L2 opt. 4 R2 620 C2 opt. C3 10nF 16 15 14 13 Bias +5V C4 10pF R3 240 IF Input C5 10nF 1 12 2 11 3 10 4 9 C8 100pF 5 C6 0.5pF 6 7 LO Input @2dBm C9 opt. 8 L1 C10 100pF 2.7uH Bias +5V ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 8.01 Active Up Mixer MO4Q Typical Performance at 25℃ - PCS, IMT Test Condition: IF = 70MHz, LO = 1630~2230MHz@2dBm, RF = 1700~2300MHz RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 8.01