Surface Mount Inductor Toroid Mount meets UL94VO Designed for IR and Vapor Phase Reflow The Inductor is a dual winding and can be used as a dual inductor, single inductor, or a transformer. Single inductors can be wired in series for high inductance values or wired in parallel for less inductance but twice the current capacity. As a 1:1 transformer, it can provide a minimum of 500 volts isolation with good frequency response. Electrical Specifications at 25o C --- Parallel Ratings --L DCR I Part Number L-15718 --- Series Ratings --L DCR I ( µH ) (Ω) ADC ( µH ) (Ω) ADC 50 .090 1.350 200 .360 .675 Schematic Diagram All dimensions in inches (mm): .450 (11.43) .270 (6.85) For series operation Connect 2 & 4 For parallel operation Connect 1 & 4 and 2 & 3 2 .550 (13.97) .450 (11.43) 1 3 .450 (11.43) 4 .550 (13.97) Rhombus Industries Inc. Transformers & Magnetic Products RHOMBUS P/N: L-15718 CUST P/N: DATE: 3/20/00 NAME: SHEET: 1 OF 1 15801 Chemical Lane, Huntington Beach, CA 92649 Phone: (714) 898-0960 FAX: (714) 896-0971 www.rhombus-ind.com