SP3 Series Mini-SIP Passive Delay Modules Similar 3-pin SIP refer to SIL2 Series Operating Specifications - Passive Delay Lines Fast Rise Time, Low DCR High Bandwidth 2-tap 4-pin SIP refer to SL2T Series Pulse Overshoot (Pos) .................................... 5% to 10%, typical Pulse Distortion (S) ...................................................... 3% typical Working Voltage ............................................. 25 VDC maximum Dielectric Strength .......................................... 100VDC minimum Insulation Resistance ......................... 1,000 MΩ min. @ 100VDC Temperature Coefficient ............................... 100 ppm/ OC, typical Bandwidth (fC) ....................................................... 0.35/tr approx. Operating Temperature Range ............................ -55O to +125OC Storage Temperature Range ............................... -65 O to +150OC 0.35 / tr Low Distortion LC Network Tight Delay Tolerance Standard Impedances: 50 to 200 Ω Stable Delay vs. Temperature: 100 ppm/OC Operating Temperature Range -55OC to +125OC Electrical Specifications at 25OC Delay (ns) Rise Time 20% - 80% max. (ns) DCR max. (Ohms) 50 Ohm Impedance P/N 55 Ohm Impedance P/N 75 Ohm Impedance P/N 100 Ohm Impedance P/N 200 Ohm Impedance P/N 0.0 −− .10 SP3-0 SP3-0 SP3-0 SP3-0 SP3-0 1 ± .20 1.6 .20 SP3-1-50 SP3-1-55 SP3-1-75 SP3-1-10 SP3-1-20 1.5 ± .20 1.6 .30 SP3-1.5-50 SP3-1.5-55 SP3-1.5-75 SP3-1.5-10 SP3-1.5-20 2 ± .20 1.6 .40 SP3-2-50 SP3-2-55 SP3-2-75 SP3-2-10 SP3-2-20 2.5 ± .20 1.6 .50 SP3-2.5-50 SP3-2.5-55 SP3-2.5-75 SP3-2.5-10 SP3-2.5-20 3 ± .20 1.7 .60 SP3-3-50 SP3-3-55 SP3-3-75 SP3-3-10 SP3-3-20 4 ± .20 1.7 .70 SP3-4-50 SP3-4-55 SP3-4-75 SP3-4-10 SP3-4-20 5 ± .25 1.8 .80 SP3-5-50 SP3-5-55 SP3-5-75 SP3-5-10 SP3-5-20 6 ± .30 2.0 .85 SP3-6-50 SP3-6-55 SP3-6-75 SP3-6-10 SP3-6-20 7 ± .30 2.3 .90 SP3-7-50 SP3-7-55 SP3-7-75 SP3-7-10 SP3-7-20 8 ± .30 2.7 .95 SP3-8-50 SP3-8-55 SP3-8-75 SP3-8-10 SP3-8-20 9 ± .30 2.9 1.10 SP3-9-50 SP3-9-55 SP3-9-75 SP3-9-10 SP3-9-20 10 ± .30 3.3 1.20 SP3-10-50 SP3-10-55 SP3-10-75 SP3-10-10 SP3-10-20 11 ± .40 3.3 1.40 SP3-11-50 SP3-11-55 SP3-11-75 SP3-11-10 SP3-11-20 12 ± .50 3.6 1.50 SP3-12-50 SP3-12-55 SP3-12-75 SP3-12-10 SP3-12-20 13 ± .60 4.0 1.60 SP3-13-50 SP3-13-55 SP3-13-75 SP3-13-10 SP3-13-20 14 ± .70 4.3 1.60 SP3-14-50 SP3-14-55 SP3-14-75 SP3-14-10 SP3-14-20 15 ± .70 4.6 1.70 SP3-15-50 SP3-15-55 SP3-15-75 SP3-15-10 SP3-15-20 16 ± .80 4.8 1.80 SP3-16-50 SP3-16-55 SP3-16-75 SP3-16-10 SP3-16-20 20 ± 1.0 5.6 2.00 SP3-20-50 SP3-20-55 SP3-20-75 SP3-20-10 SP3-20-20 1. Rise Times are measured from 20% to 80% points. 2. Delay Times measured at 50% points of leading edge. 3. Output terminated to ground through RL=ZO Dimensions in inches (mm) SP3 Style Schematic SP3 1 2 IN COM Rhombus Industries Inc. .375 (9.53) MAX. 3 OUT .020 (0.51) TYP. .030 (0.76) TYP. .100 (2.54) Specifications subject to change without notice. .120 (3.05) MAX. .490 (12.45) MAX. For other values & Custom Designs, contact factory. .120 (3.05) MIN. .010 (0.25) TYP. .060 (1.52) TYP. SP3 9901 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 • FAX: (714) 896-0971 www.rhombus-ind.com • email: [email protected]