SRT Resistor Technology High-Value Chip Resistors Type: CHS Sizes: 0402, 0603, 0805, 1206, 1210, 2512, 4020 Features: • • • • • • • High Value Chip Resistors in Thickfilm Low temperature and voltage dependency Untrimmed for higher Working Voltage up to 6000 V Suitable for high vacuum applicatons – no organics Contact areas PtAg for soldering and conductive glueing High temperature application possible (up to 300°C) non-magnetic Dimensions: Size L B D C 0402 1.04 ±0.05 0.50 ±0.05 0.30 0603 1.50 +0.15/-0.05 0.80 +0.15/-0.05 0.40 +0.15/-0.05 0.2 +0.2/-0.1 0805 2.00 +0.15/-0.05 1.25 +0.15/-0.05 0.40 +0.15/-0.05 0.3 +0.2/-0.1 1206 3.20 +0.15/-0.05 1.50 +0.2/-0.05 0.40 +0.15/-0.05 0.3 +0.2/-0.1 1210 3.20 +0.15/-0.05 2.50 +0.2/-0.05 0.50 +0.15/-0.05 0.8 ±0.2 2512 6.30 +0.15/-0.05 3.50 +0.2/-0.05 0.60 +0.15/-0.05 0.9 ±0.2 4020 10.20 +0.15/-0.05 5.10 +0.2/-0.05 0.60 +0.15/-0.05 0.9 ±0.2 +0.15/-0.05 B 0.1 +0.1/-0.05 D L C L = Length, B = Width, D = Thickness, C = Width of wrap around (in mm) Packaging: Bulk in plastic bags – minimum quantity 100 pieces per value Blistertape acc. to IEC 60286-3 – minimum 1000 pieces per value Reel diameter 180 mm or 330 mm Ordering Data: Type – value – tolerance – TCR – packaging Example: CHS 4020 10G ±10% TCR 100 Tape 180 mm Untrimmed parts are indicated by the extension “NA” in the order code: Type – value – tolerance – NA – TCR - packaging Example: CHS 4020 10G ±10% NA TCR 100 Tape 180 mm If no requirements for TCR and taping are given, the standard value (highest value in table) will be supplied and packaging is bulk. Standard measuring voltage is 10V, required different voltages are to specify explicitly. Issue 07-2008 SRT Resistor Technology GmbH Ostlandstr. 31 D-90556 Cadolzburg Germany Fon: Fax: E-mail: Internet: +49 (0)9103 / 7952-0 +49 (0)9103 / 5128 [email protected] www.srt-restech.de SRT Resistor Technology High-Value Chip Resistors Type: CHS Sizes: 0402, 0603, 0805, 1206, 1210, 2512, 4020 Technical data – depending on size: Size 0402 Power rating P70 (mW) (P155 = 0 mW) Max. Working Voltage U_, Ueff (V) trimmed untrimmed (Tol. > 5%) 0603 0805 1206 1210 2512 4020 1) 50 100 125 250 350 30 100 75 220 100 300 200 600 300 900 1000 2000 5/10/20% TC50/100 <500 ppm/V 5/10/20% TC100/250 <1000 ppm/V 5/10/20% TC250/500 <1000 ppm/V 10/20/30% TC1000/2000 <2000 ppm/V 1/5/10/20% TC50/100 <250 ppm/V 2/5/10/20% TC100/250 <500 ppm/V 5/10/20% TC250/500 <500 ppm/V 5/10/20/30% TC500/1000 <2000 ppm/V 10/20/30% TC1000/2000 <10000 ppm/V 10/20/30% TC3000 <15000 ppm/V 0.5/1/5/10/20% TC50/100 <100 ppm/V 2/5/10/20% TC100/250 <250 ppm/V 5/10/20% TC250/500 <250 ppm/V 5/10/20% TC500/1000 <1000 ppm/V 10/20/30% TC1000/2000 <5000 ppm/V 10/20/30% TC3000 <10000 ppm/V 0.5/1/5/10/20% TC25/50/100 <100 ppm/V 2/5/10/20% TC50/100/250 <100 ppm/V 5/10/20% TC100/250 <250 ppm/V 5/10/20% TC500/1000 <1000 ppm/V 10/20/30% TC1000/2000 <2000 ppm/V 10/20/30% TC3000 <5000 ppm/V 0.5/1/5/10/20% TC25/50/100 <50 ppm/V 2/5/10/20% TC50/100/250 <100 ppm/V 5/10/20% TC100/250 <100 ppm/V 5/10/20% TC250/500 <500 ppm/V 5/10/20% TC500/1000 <1000 ppm/V 10/20/30% TC1000/2000 <2000 ppm/V 0.5/…/20% TC25/50/100 <10 ppm/V 1/5/10/20% TC25/50/100 <25 ppm/V 1/5/10/20% TC100/250 <25 ppm/V 2/5/10/20% TC250/500 <100 ppm/V 5/10/20% TC250/500 <250 ppm/V 10/20/30% TC500/1000 <500 ppm/V 1000 1500 1) 4000 6000 Ranges/Tolerances/ TCR2)/VCR 10M – 100M >100M – 500M >500M – 1G >1G – 10G >10G – 100G >100G – 1T 0.25/…/10% TC25/50/100 <5 ppm/V 0.5/…/20% TC25/50/100 <10 ppm/V 1/5/10/20% TC25/50/100 <10 ppm/V 2/5/10/20% TC50/100 <25 ppm/V 5/10/20/30% TC100/250 <100 ppm/V 10/20/30% TC250/500 <250 ppm/V 1) At continuous power dissipation the dimensions of solder-pads have to secure sufficient heat-conduction TC25/50: Temperature range +25°C...+85°C Lower values of tolerance, TCR and VCR on request and agreement 2) Technical data – general: Temperature range -55°C ... +155°C Climatic category acc. to DIN EN 60068-1 55/155/56 Solderability acc DIN EN 60068-2-58 (lead-free and lead-containing) Maximum soldering temperature acc. DIN EN 60068-2-58 3) 250°C, 3s 260°C, 10s Extended temperature range up to 300°C possible- see datasheet: High temperature chip resistors Long term stability <1G <10G ≥10G Storage 125°C/1000h <1% <2% <5% <0.5% <1% <2% Maximum Voltage/1000h 3) Up to 6 months after shipment; longer at storage in Nitrogen Data not specified according EN 140401-802 (CECC 40401-802) Issue 07-2008 SRT Resistor Technology GmbH Ostlandstr. 31 D-90556 Cadolzburg Germany Fon: Fax: E-mail: Internet: +49 (0)9103 / 7952-0 +49 (0)9103 / 5128 [email protected] www.srt-restech.de