0.4 Inch (10.2mm) 4 Digit CLOCK STICK DISPLAY AlInGaP Red (630nm) MSQC4H11C AlInGaP Red (642nm) MSQC4R11C AlInGaP Yellow MSQC4Y11C PACKAGE DIMENSIONS FEATURES •Bright Bold Segments •Common Anode/Cathode •Low Power Consumption •Low Current Capability •Neutral Segments •Grey Face •Epoxy Encapsulated PCB •High Performance •High Reliability APPLICATIONS •Appliances NOTES: •Automotive •Dimensions are in inches (mm) •Tolerances are +/- 0.010 (0.25) unless otherwise stated. •Instrumentation •Process Control MODELS AVAILABLE Part Number Colour Description MSQC4H11C AlInGaP 630nm Clock, RHDP, Common Anode Low Current Capability MSQC4R11C AlInGaP 642nm Clock, RHDP, Common Anode Low Current Capability MSQC4Y11C AlInGaP Yellow Clock, RHDP, Common Anode Low Current Capability (For other colour options, contact your local area Sales Manager) Special 0.4 Inch (10.2mm) 4 Digit CLOCK STICK DISPLAY ABSOLUTE MAXIMUM RATINGS(1) (TA = 25oC, unless otherwise specified) Part Number MSQC4H11C MSQC4R11C MSQC4Y11C Parameter Continuous Forward Current Units 25 25 25 mA 100 100 100 mA 60 60 60 mW 0.36 0.36 0.36 mW (each segment) Peak Forward Current (F = 10KHz, D/F = 1/10) Power Dissipation (PD) *Derate Linearly from 25oC Reverse Voltage per Die 5 Volts Operating and Storage Temperature Range -40oC to +85oC Lead soldering time (1/16 inch from standoffs) 5 seconds @ 230oC ELECTRO-OPTICAL CHARACTERISTICS(1) (TA = 25oC, unless otherwise specified) Part Number MSQC4H11C MSQC4R11C MSQC4Y11C Parameter Units Test Condition Luminous intensity(2) (IV) Minimum ( Standard Current) 6000 4000 8000 ucd IF = 10mA Typical (Standard Current) 7800 5800 12800 ucd IF = 10mA 510 510 510 ucd IF = 2mA 1000 1000 1000 ucd IF = 2mA Typical (Standard Current) 2.05 2.05 2.05 Volts IF = 10mA Maximum (Standard Current) 2.40 2.40 2.40 Volts IF = 10mA Typical (Low Current) 1.80 1.80 1.80 Volts IF = 2mA Maximum (Low Current) 2.20 2.20 2.20 Volts IF = 2mA Peak Wavelength 632 639 591 nm IF = 10mA Dominant Wavelength 624 631 585 nm IF = 10mA Spectral Line 1/2 Width 20 20 20 nm IF = 10mA 5 5 5 Minimum (Low Current) Typical (Low Current) Forward Voltage (VF) Reverse B(3).Voltage (VR) NOTES: (1) Data per individual LED element (2) Luminous intensity (ucd) = average light output per segment (3) B = breakdown Volts IR = 100uA 0.4 Inch (10.2mm) 4 Digit CLOCK STICK DISPLAY PIN ORIENTATION, SEGMENT IDENTIFICATION, AND PRODUCT MARKING SCHEMATICS 0.4 Inch (10.2mm) 4 Digit CLOCK STICK DISPLAY GRAPHICAL DATA AlInGaP 630nm (TA = 25oC, unless otherwise specified) Relative Intensity vs Case Temp. Spectral Response Forward Current vs Forward Voltage Luminous Intensity vs Duty Cycle Maximum Forward Current vs Ambient Temperature Maximum Peak Current vs Duty Cycle