TITLE TRANSFORMER, ADSL SCHOTT CORPORATION 1000 PARKERS LAKE ROAD WAYZATA, MN 55391 AGENCY APPROVAL: PART NUMBER BABT # 609608 REV TEMP CLASS 130°C Designed to meet UL1950/IEC-950 requirements. Working Voltage 250 Vrms, Supplementary Insulation REF PWB LAYOUT .560 MAX (14.22) 6 1. INDUCTANCE: @ 10 kHz, 0.1 Vrms 10-7 tie 8&9 = 4.5 to 5.5 mH 3. INTERWINDING CAPACITANCE: @ 100 kHz, 0.1 Vrms 1-10, (tie 2&3 and 8&9) = 45 pF Max. 5 4. TURNS RATIO: 1-4 to 10-7 (tie 2&3 and 8&9) = 1 : 1 ± 2% .063 (1.60) 10 SCHOTT 32502 YYWW .560 MAX (14.22) 2. LEAKAGE INDUCTANCE: @ 100 kHz, 0.1 Vrms 10-7 (tie 8&9, 1&3, 2&4) = 15 µH Max. 8. DWV: 1500 VAC 1 minute (1800 Vac or 2500 Vdc, 1 second Schott production test) TRIP CURRENT 2 mA MAX 1,2,3,4 to 7,8,9,10 ALL WINDINGS TO CORE .035 (0.89) .100 (2.54) .71 (18.03) 1 .500 MAX (12.7) A .606 (15.39) .670±.010 (17.02) .100 (2.54) PINS: .016 X .028 (0.40 X 0.70) 6. LONGITUDINAL BALANCE: 100 kHz 7-10, 100 OHM INPUT = 50 dB MIN 7. TOTAL HARMONIC DISTORTION: 100 kHz, 4.0 V, (1-4), 100 OHM INPUT = - 80 dB MAX 1 END inches (mm) SPECIFICATIONS 5. DC RESISTANCE: OHMS 1-3 = 1.40 Max. 2-4 = 1.40 Max. 7-9 = 1.40 Max. 8-10 = 1.40 Max. OR: 1-4, TIE 2 & 3 = 2.8 MAX 7-10 TIE 8 & 9 = 2.8 MAX 32502 PAGE G NOTE: COPLANARITY .006 MAX 10 1 8 3 9 2 7 4 LINE CHIP TOLERANCES UNLESS OTHERWISE NOTED 2 PLACE + - .02 3 PLACE + - .010 ANGLE + - °