TITLE LM259X Inductor 100 µHy .76 ADC SCHOTT CORPORATION 1000 PARKERS LAKE ROAD WAYZATA, MN 55391 PART NUMBER AGENCY APPROVAL: N/A REV 34548 PAGE D 1 Old Schott P/N: 67144060 ELECTRICAL CHARACTERISTICS Specifications at room temperature (ref. 25°C) REF: PWB PATTERN .500 MAX (12.7) 1. INDUCTANCE: @ 10 kHz, 0.1 Vrms, (1 thru 4 to 5 thru 8 ) = 100 - 130 µH 8 5 2. DC RESISTANCE: (1 thru 4 to 5 thru 8 ) = .094 Ohms Max. .100 ±.010 (2.54) SCHOTT 14406 YYWW .47 MAX (11.94) 3. SRF: 1.1 MHZ Min. 4 .295 ±.010 (7.5) 1 4. HIPOT: 500 VDC WINDING TO CORE 2 SEC., 5 mA MAX PINS: .024 (.061) Sq. .450 MAX (11.43) GENERAL NOTES: 1. Current rating is the current at which the inductance is a minimum of 90% of the rated value. 2. All pins may not be used; electrical schematic is based on the standard footprint. .120 MIN (3.05) .100 ±.010 (2.54) inches (mm) .295 ± .010 (7.49) Jumper terminals on PC Board. 1,2,3,4 Jumper terminals on PC Board. 5,6,7,8 2 PLACE TOLERANCES UNLESSOTHERWISENOTED + - .03 3 PLACE + - .010 ANGLE + - °