TITLE TRANSFORMER PN 39583 AGENCY APPROVAL PENDING REV S1 SPECIFICATIONS -Designed to meet UL1950/IEC950 with supplementary isolation for a working voltage < = 250 VRMS -Operating temperature: -40° To +85°C -Meets Telcordia GR1089,surge 1 of table 4-3 (5.0KV,2x10us) 20 pulses at 10 second intervals with alternate polarities. A 5 .063 (1.60) 6 SCHOTT 39583 YYWW 1.INDUCTANCE: 0.1 VRMS, 10 kHz, 0 - 100 mADC 1-5 TIE 4&2 = 2.82 TO 3.18 mH (3.0mH +/- 6%) REF PWB LAYOUT .670 ±.010 (17.02) .560 MAX (14.22) 1 .035 (0.89) .098 (2.5) 10 2. TURNS RATIO: 1-5 (TIE 4&2) : 9-7 = 5.45 : 1 ± 1% 3. INDUCTANCE RATIO: 0.1VRMS, 10 kHz 1-5 (TIE 4&2) = 5.4 : 1 ± 1% 4. LEAKAGE INDUCTANCE: 0.1 VRMS, 100 kHz 1-5 TIE 4&2, SHORT (9-7) = 15µH Max 5. DC RESISTANCE: OHMS Max 1-5 (tie 4 &2) =4.0 9-7 = 0.35 6. DIELECTRIC STRENGTH: 2050 VAC, 1 SECOND (ALT. 2900 VDC, 1 SECOND) Primary to Secondary-Safety Critical 720 VAC, 1 Minute (ALT. 1000 VDC, 1 Second) Terminal #1 to Terminal #2 .710 18.03) B .500 MAX (12.70) .008 (0.2) .606 ± .006 (15.39) .098 ±.010 (2.5) .028 (0.7) NOTE: COPLANARITY < .004 (0.10) 7. LONGITUDINAL BALANCE: 20 kHz TO 250 kHz = 55 dB MIN 1 9 4 2 8 8. FREQUENCY RESPONSE: 17 kHz TO 600 kHz (ref.100kHz)= +/- .5dB 9. INSERTION LOSS: 100 kHz, = .55dB Max 10. IWC: : 100 kHz, 0.1 Vrms, (1,4,2,5) to (9-7) = 120 pF MAX 11. THD: 5 kHz, 2.0 Vrms = -82dB Max 5kHz,4.0VRMS = -76dB Max LINE CHIP 7 5 TOLERANCES UNLESS OTHERWISE SPECIFIED 1000 Parkers Lake Road, Wayzata, MN 55391, (952) 475-1173, www.schottcorp.com INCHES-DECIMALS .XX = ± .01 MILLIMETERS (mm) .XX = ± 0.2 2 .XXX = ±.005 OF ANGLES ± 1° 11