SCHURTER 00318231

OGD
Fuseholder Blocks & Clips
www.schurter.com/pg02b
Fuseholder Open Design, 5 x 20 / 6.3 x 32 mm, THT, IEC: 500 VAC, UL/CSA: 600 VAC/DC, Cover, IEC
60335-1
500 VAC · 4 W / 10 A (VDE) · 600 VAC/DC · 16 A (UL/CSA)
Description
-Fuseholder for 500 VAC applications
-Meets the new requirements of IEC 60335-1 Ed. 4.0 for appliances
in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Order
number: 0031.8231.15
-Fuse block accepts 5x20 or 6.3x32 fuse-links
Standards
-IEC 60127-6
-UL 4248-1 / UL 512
-CSA C22.2 no. 39
Applications
-Equipment with three-phase supply (400 VAC)
-Industrial electronic
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check,
Accessories, Product Change Notification (PCN)
Approvals
-VDE License Number: 40008993 (250V) + 40018378 (500V)
-UL File Number: E39328
Technical Data
Fuse-Link
Mounting Mounting
Terminal
Rated Voltage
Rated Current
Rated Power Acceptance IEC
Soldering Methods
Solderability
5 x 20 or 6.3 x 32 mm
PCB
Screw or Rivet
Solder THT
500 VAC (VDE), 600 VAC/DC (UL/CSA)
10 A (VDE), 16 A (UL/CSA)
4 W / 10 A @ Ta 23 °C
Admissible power acceptance at higher ambient temperature see derating
curves
Degree of Protection
IP 00 / IP 20
Protection Class
Suitable for appliances with protection
class 1 or 2 acc. to IEC 61140
Admissible Ambient Air Temp. -40 °C to 85 °C
Climatic Category
40/085/21 acc. to IEC 60068-1
Material: Socket
Thermoplastic, black, UL 94V-0
Material: Terminals
Tin-Plated Copper Alloy
Unit Weight (Socket/Cap)
3.7 g
Storage Conditions
0 °C to 60 °C, max. 70% r.h.
Product Marking
, Type, Voltage, Power Acc./Current
Rating, Approvals
Resistance to Soldering Heat
Contact Resistance
Dielectric Strength
Impulse Withstand Voltage
Insulation Resistance
Overvoltage Category
Pollution Degree
Resistance to Vibration
Fuses
Wave
235 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta, method 1
260 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 1A
< 5 mΩ at 20 mV
> 3 kV between L-N
(50 Hz; 1 min)
> 4 kV between L-N
> 10 MΩ between L-N
(500 VDC; 1 min)
I - III acc. to IEC 60664-1
2 acc. to IEC 60664-1
acc. to IEC 60068-2-6, test Fc
OGD
Fuseholder Blocks & Clips
www.schurter.com/pg02b
Abmessungen
35.4 mm
+0.1
1.3 -0
ø 2.7
1.1
5±0.1
0.7
12.7
15.8
ø 4.8
5
20 ±0.1
10.9
20 ±0.5
Drilling diagram
Derating Curves for Fuseholders
Admissible Power Acceptance in Watt
4.0
3.5
3.0
I = 1.0 In
2.5
I = 0.7 In
2.0
I = << In
1.5
1.0
0.5
0.0
0
20
40
60
80
100
Ambient Air Temperature Ta °C
Variants
Holder
Material
Remark
Order Number
l
Thermoplastic
-
0031.8231
l
Spec. Thermoplastic 1
Approvals pending
0031.8231.15
Spec. thermoplastic meet the new requirements of IEC 60335-1 Ed. 4.0 for appliances
in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire
tests acc. to IEC 60695-2-11 to -13.
Packaging Unit Bulk 178 x 91 x 71 mm (100 pcs.)
Accessories
Description
Cover OGD, OGD-SMD Cover for Holder OGD, OGD-SMD Reflow-Cover
0853.0917
The
specifications, descriptions and illustrations indicated in this document are based on
Fuses
current information. All content is subject to modifications and amendments.