6120-5 Connectors (Inlets/Outlets) www.schurter.com/pg07 IEC Appliance Inlet C16A, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 6120-5 C16 A 155° C Description Other versions on request -Panel Mount: Snap-in version from front side -Appliance Inlet, Pin temperature 155 °C, Protection class I -Solder terminals or quick connect terminals -Other panel thickness -Quick-connect terminals 4.8 x 0.8 mm -Types for enhanced glow wire test requirements acc. IEC 60695-211 to -13 for the use in unattended household equipment acc. IEC 60335-1 Approvals References -VDE License Number: 40015595 -UL License Number: E96454 General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 2 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 155 °C from front side IP 30 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Solder terminals or quick connect terminals Snap-in: 1.5/2.5/3 mm Thermoplastic, black, UL 94V-0 Dimensions 6120-5 Appliance Inlet C16A acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for very hot conditions) pin-temperature 155 °C, 10 A, Protection Class 1 30 mm max.R3 30 E 3 27.5 20 23 +0.2 0 S ±0.1 +0.2 0 E: Solder terminals: 22.5 mm E: Quick connect terminals: 25.5 mm S: 1.5; 2.5; 3.0 mm Connectors 6120-5 Connectors (Inlets/Outlets) www.schurter.com/pg07 Variants Type Panel mounting Panel Thickness s [mm] Terminal Order Number 6120-5 Snap-in 1.5 Quick connect terminals 6.3 x 0.8 mm 6120.5315 6120-5 Snap-in 2.5 Quick connect terminals 6.3 x 0.8 mm 6120.5325 6120-5 Snap-in 3 Quick connect terminals 6.3 x 0.8 mm 6120.5330 6120-5 Snap-in 1.5 Solder terminals 3.8 x 0.8 mm 6120.5115 6120-5 Snap-in 2.5 Solder terminals 3.8 x 0.8 mm 6120.5125 6120-5 Snap-in 3 Solder terminals 3.8 x 0.8 mm 6120.5130 Articles for enhanced glow wire test requirements acc. IEC 60695-2-11 to -13 can be ordered with ending ".15" (xxxx.xxxx.15). They are suitable for the use in unattended household equipment acc. IEC 60335-1. Packaging unit 50 Pcs Mating Outlets/Connectors Category / Description Connector Overview complete IEC Connector C15A, Rewireable, Straight 0102 IEC Connector C15A, Rewireable, Straight 0102-G IEC Connector C15A, Rewireable, Angled 0112 Connector further types to 6120-5 The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.