DD21 Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C14 with Line Switch 2-pole, Fuseholder 1- or 2-pole, for PCB mounting, Standard or Medical Fuse drawer C14 70° C Description -Panel Mount: Screw-on mounting on PCB from rear-side -3 Functions: Appliance Inlet Protection class I, Line Switch 2-pole, Fuseholder for fuse-links 5 x 20 mm 1‑ or 2‑pole -PCB solder terminals -Alternative: version with line filter DD22 Alternative: version for panel mounting DD11 -With cover on rear-side Approvals -VDE License Number: 40018283 -UL License Number: E93617 Characteristics -Ultra-compact design. Ideal for low profile designs -All single elements are already wired -For added safety "Extra-Safe" fuse drawers are available Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuse drawer can only be opened with the aid of a tool The fuseholder is accessible from the equipment front -Ideal for application with high transient loads -Qualified for use in equipment according IEC/EN 60950 Other versions on request -Fuse drawer 1-pole, plus spare fuse case -Fuse drawer 2-pole, with shorting bar -Other rocker marking -Line switch 1-pole -Protection class II, 70°C -Without cover References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 10 A / 250 VAC; 50 Hz 10 A / 125 VAC; 60 Hz ¹⁾ > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 85 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 For PCB mounting 3 mm, Ground terminal, additional quick connect 4.8 x 0.8 mm Screw-on mounting: max 3 mm Mounting screw torque max 0.5 Nm Thermoplastic, black, UL 94V-0 Appliance Inlet Fuseholder Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Line Switch C14 acc. to IEC/EN 60320-1 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Rocker switch 2-pole, non-illuminated or illuminated, acc. to IEC 61058-1 Technical details 1) with cover 8 A, without cover 10 A Connectors DD21 Power entry modules without line filter www.schurter.com/pg05 Dimensions Screw version 65 mm 65 34.6 46.7 3.5 2.5 1.5 33 1. 85 10.3 1.25 6 29.2 0.8 56 ±0.15 56 46.6 3.2 6 ±0.10 24.4 4 9.5 3. 4.5 5 1.3 39.65 ±0.15 +0 0 .10 .10 0 +0 1.6 1.3 3.6 +0 0 .10 9.55 ±0.10 32.4 3.6 10.45 ±0.10 56 ±0.15 1) with cover 2) without cover For grounding additional quick connect terminal 4.8 x 0.8 mm Diagrams non illuminated illuminated 1) Line 2) Load 1) Line 2) Load 2-pole 2.0 1.5 I = 1.0 In I = 0.7 In 1.0 I = << In 0.5 0.0 0 20 40 60 80 100 Admissible power acceptance in Watt per pole Admissible power acceptance in Watt Derating Curves 1-pole Ambient air temperature Ta °C 1.6 1.4 1.2 I = 1.0 In 1.0 0.8 I = 0.7 In 0.6 I = < < In 0.4 0.2 0.0 0 20 Ambient air temperature Ta °C Connectors 40 60 80 100 3. ±0 R 47.1 ±0.10 19.05 10.45 2 28.1 ±0.10 32.3 27.1 2.5 0.95 3.15 4.5 17 27.2 3.4 6 2) .0 5 R 1) DD21 Power entry modules without line filter www.schurter.com/pg05 Variants Fuse drawer must be ordered separately (see accessories). Fingergrip and Extra Safe. The same drawer as used by type KEA. Fuseholder Line Switch Illumination Color Order Number 1-pole 2-pole non-illuminated - DD21.0111.1111 1-pole 2-pole illuminated red DD21.0113.1111 1-pole 2-pole illuminated green DD21.0114.1111 2-pole 2-pole non-illuminated - DD21.0121.1111 2-pole 2-pole illuminated red DD21.0123.1111 2-pole 2-pole illuminated green DD21.0124.1111 UL approvals: versions without cover are approved for 10 A, and can be ordered with "0" as last digit of the order number (e.g. DD21.xxxx.xxx0) Packaging unit 40 Pcs Required Accessory Description Fusedrawer 2 Fusedrawer with and without Voltage Selector Insert Fingergrip, 2-pole 4301.1401 Extra-Safe, 2-pole 4301.1403 Fingergrip, 1-pole 4301.1405 Extra-Safe, 1-pole 4301.1407 ... Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 5092 Appliance Outlet further types to DD21 Connector Overview complete IEC Connector C15, Rewireable, Straight 0101 IEC Connector C15A, Rewireable, Straight 0102 IEC Connector C15A, Rewireable, Straight 0102-G IEC Connector C15A, Rewireable, Angled 0112 IEC Connector C13, Rewireable, Angled 4012 Connector further types to DD21 ... Power Cord Overview complete Power Cord with IEC Connector C13, Angled 0311 Power Cord with IEC Connector C13, Angled 3011 Power Cord with IEC Connector C13, Angled 3012 Power Cord with IEC Connector C13, Angled 3013 Power Cord with IEC Connector C13 3020 Power Cord further types to DD21 ... The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.