FR151G THRU FR157G VOLTAGE 50V ~ 1000V Elektronische Bauelemente 1.5 AMP Glass Passivated Fast Recovery Rectifier RoHS Compliant Product A suffix of "-C" specifies halogen-free. DO-15 .140(3.6) .104(2.6) DIA. FEATURES 1.0(25.4) MIN. . Low Forward Voltage Drop . High Current Capability . High Reliability . High Surge Current Capability . High Speed Switching .300(7.6) .230(5.8) 1.0(25.4) MIN. .034(.9) .028(.7) DIA. MECHANICAL DATA . Case: Molded Plastic . Epoxy: UL 94V-0 Rate Flame Retardant . Lead: Axial Lead, Solder Able per MIL-STD-202, Dimensions in inches and (millimeters) Method 208 Guaranteed . Polarity: Color Band Denotes Cathode End . Mounting Position: Any . Weight: 0.40 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS O Rating 25 C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current FR151G FR152G FR153G FR154G FR155G FR156G FR157G UNITS 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V .375"(9.5mm) Lead Length at Ta=55 C Peak Forward Surge Current, 8.3 ms single half sine-wave 1.5 A superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.5A Maximum DC Reverse Current Ta=25 C 50 1.3 5.0 A V at Rated DC Blocking Voltage Ta=100 C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range TJ, TSTG 100 150 250 30 -65 +175 500 nS pF C NOTES: 1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C. 01-Jun-2007 Rev. A Page 1 of 2 FR151G THRU FR157G VOLTAGE 50V ~ 1000V Elektronische Bauelemente 1.5 AMP Glass Passivated Fast Recovery Rectifier ƔRATING AND CHARACTERISTIC CURVES ( FR151G THRU FR157G ) FIG.1-TYPICAL FORWARD FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 10 3.0 1.0 1.8 1.5 1.2 Single Phase 0.9 Half Wave 60Hz Resistive Or Inductive Load 0.6 0.375"(9.5mm) Lead Length 0.3 0 20 40 Tj=25 C 60 80 100 120 140 160 180 200 AMBIENT TEMPERATURE ( C) Pulse Width 300us 1% Duty Cycle 0.1 FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT .01 .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE,(V) FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS 50W NONINDUCTIVE 10W NONINDUCTIVE ( ) (+) D.U.T. 25Vdc (approx.) PEAK FORWARD SURGE CURRENT,(A) INSTANTANEOUS FORWARD CURRENT,(A) 50 PULSE GENERATOR (NOTE 2) ( ) 50 40 30 Sine Wave JEDEC method 10 0 1 5 (+) 1W NONINDUCTIVE 2. Rise Time= 10ns max., Source Impedance= 50 ohms. 0 70 JUNCTION CAPACITANCE,(pF) | | | | | | | | -0.25A 100 FIG.5-TYPICAL JUNCTION CAPACITANCE NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. trr 50 10 NUMBER OF CYCLES AT 60Hz OSCILLISCOPE (NOTE 1) +0.5A 8.3ms Single Half Tj=25 C 20 60 50 40 30 20 10 0 -1.0A 1cm SET TIME BASE FOR .01 .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) 50 / 10ns / cm http://www.SeCoSGmbH.com/ 01-Jun-2007 Rev. A Any changing of specification will not be informed individual Page 2 of 2