RS801G THRU RS807G VOLTAGE 50V ~ 1000V 8.0 AMP Glass Passivated Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen-free. .15 X.23L (3.8 X5.7L) HOLE T HR U .935(23.7) .895(22.7) .700(17.8) .660(16.8) .780(19.8) .740(18.8) AC 1.00 MIN. (25.4) ƔFEATURES .052(1.3) .048(1.2) DIA. .220(5.6) SPACING .180(4.6) .078 (2.0) . Surge Overload rating – 200 ~ 300 amperes peak . Ideal for printed circuit board . Reliable low cost construction utilizing + .280(7.1) .268(6.8) Molded plastic technique Dimensions in inches and (millimeters) . Plastic material has underwrites laboratory Flammability classification 94V-0 . Polarity: marked on body . Mounting position: Any . Weight: 10 grams ƔMAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 к ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz, For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Tc=100к Rectified Output Current, at Ta=50к051к045к Peak Forward Surge Current, 8.3 ms single half Sine-wave superimposed on rated load (JEDEC method) Maximum Instantanous Forward Voltage Drop Per Element at 8.0A DC Maximum Reverse Leakage at rated Ta=25 к DC Blocking Voltage per Element Tc=100 к Operating Temperature Range TJ Storage Temperature Range TSTG http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A RS801G RS802G RS803G RS804G RS805G RS806G RS807G 50 35 50 100 70 100 200 140 200 400 280 400 8.0 6.0 600 420 600 800 560 800 1000 700 1000 UNITS V V V A 300 A 1.0 V 10 300 -55 ~ +150 -55 ~ +150 µA mA к к Any changing of specification will not be informed individual Page 1 of 2 RS801G THRU RS807G VOLTAGE 50V ~ 1000V 8.0 AMP Glass Passivated Bridge Rectifiers Elektronische Bauelemente ƔRATING AND CHARACTERISTIC CURVES ( RS801G THRU RS807G ) FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 10 8 6 Single Phase 4 Half Wave 60Hz Resistive Or Inductive Load 2 0 0 25 50 75 100 125 150 175 CASE TEMPERATURE,( C) PEAK FOR WARD SURGE CURRENT (A) , AVERAGE FOR WARD CURRENT ,(A) 250 12 200 150 8.3ms Single Half Tj=25 C Sine Wave 100 JEDEC method 50 0 1 5 50 10 100 NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL FORWARD FIG.4-TYPICAL REVERSE CHARACTERISTICS CHARACTERISTICS 50 50 10 10 REVERSE LEAKAGE CURRENT , ( µA) INST ANT ANEOUS FOR WARD CURRENT ,(A) 100 3.0 1.0 Tj=25 C Pulse Width 300us 1% Duty Cycle 0.1 3.0 Tj=100 C 1.0 0.1 Tj=25 C .01 0 .2 .4 .6 .8 1.0 FORWARD VOLTAGE,(V) http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A 1.2 1.4 .01 0- 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLT AGE, (%) Any changing of specification will not be informed individual Page 2 of 2