SBCR103S THRU SBCR107S VOLTAGE 200V ~ 1000V Elektronische Bauelemente 1.0AMP Miniature Surface Mount Bridge Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen-free. Case : SBCR 0.213(5.40) 0.205(5.20) 0.132(3.35) ~ * High current capability * Low profile package R0 .2 ~ 0.224(5.70) * Internal constructure with GPRC (glass passivated rectifier chip) * RoHS Compliant * Lead less chip form , no lead damage * Solder joint , no wire bond & lead frame * Low power loss , High efficiency 0.039(1.00) 0.232(5.90) FEATURES 0.047(1.20) 0.128(3.25) 0.037(0.95) 0.033(0.85) * For surface mounted applications * Built-in strain relief * High surge capability * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 0.051(1.30) 0.043(1.10) MECHANICAL DATA Case : Packed with FRP substrate and epoxy underfilled Terminals : Tin plated, solderable per MIL-STD-750, Method 2026. Polarity : Laser Cathode band marking Weight : 0.07 gram *Dimensions in inches and (millimeters) o Absolute Maximum Ratings Electrical Characteristics (Ta = 25 C unless otherwise specified) Symbol SBCR103S SBCR104S SBCR105S SBCR106S SBCR107S Unit Max. repetitive peak reverse voltage VRRM 200 400 600 800 1000 V Max. RMS voltage VRMS 140 280 420 560 700 V Max. DC blocking voltage VDC 200 400 600 800 1000 V Max. Average Forward Rectified Current o @ TA = 55 C IF(AV) 1.0 A Peak forward surge current 8.3ms single half sine-wave IFSM 30 A VF 0.9 1.0 V IR 5 200 µA Current squared time for fusing (t < 8.3 ms) I2t 3.74 A2 s Typical junction capacitance per element (NOTE 1) Cj 25 pF Rθ(JA) 110 TJ, TSTG -55 to +175 ITEM Superimposed on rated load (JEDEC method) IF = 0.4 A IF = 1.0 A Forward voltage Max. DC reverse current at rated DC blocking voltage o @TC = 25 C o @TC = 150 C Thermal resistance Operating junction and storage temperature Range o C/W o C NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. (2) Thermal resistance, junction to ambient, measured on PC board with 5.0mm2 (0.03mm thick) land areas. http://www.SeCoSGmbH.com 01-Apr.-2005 Rev. A Any changing of specification will not be informed individual Page 1 of 2 SBCR103S THRU SBCR107S VOLTAGE 200V ~ 1000V Elektronische Bauelemente 1.0AMP Miniature Surface Mount Bridge Rectifier s RATINGS AND CHARACTERISTIC CURVES SBCR103S THRU SBCR107S FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 40 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.2 1.0 0.8 0.6 0.4 0.2 60 Hz Resistive or Inductive load 30 20 10 0 0 0 25 50 75 100 125 150 1 175 10 100 NUMBER OF CYCLES AT 60Hz o AMBIENT TEMPERATURE, C FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES IINSTANTANEOUS FORWARD CURRENT, AMPERES 10.00 1.00 0.10 10.0 o TJ=100 C 1.0 o TJ=25 C 0.10 o 0.01 0.2 TJ=25 C PULSE WIDTH=300uS 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0 1.6 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,% INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 100 o TJ = 25 C 10 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS http://www.SeCoSGmbH.com 01-Apr-2005 Rev. A Any changing of specification will not be informed individual Page 2 of 2