SL2136 CMOS Elektronische Bauelemente Positive Voltage Regulator RoHS Compliant Product SOT-223 Description The SL2136 positive,linear regulators feature low quiescent current (30µA typ.) with low dropout voltage, making them ideal for battery applications.These rugged devices have both Thermal Shutdown and Current Fold-back to prevent device failure under the "Worst" of operating conditions.The SL2136 is stable with an output capacitance of 2.2µF or greater. Features * Low Temperature Coefficient * Over-Temperature Shutdown * Very Low Dropout Voltage * High Accurate ± 1.5% * Short Circuit Current Fold-back * Guaranteed 600mA output * Current Limiting REF. A C D E I H Millimeter Min. Max. 6.70 7.30 2.90 3.10 0.02 0.10 0 10 0.60 0.80 0.25 0.35 REF. B J 1 2 3 4 5 Millimeter Min. Max. 13 TYP. 2.30 REF. 6.30 6.70 6.30 6.70 3.30 3.70 3.30 3.70 1.40 1.80 * Factory Pre-Set Output Voltage Applications * PC Peripherals * Wireless Devices * Portable Electronics * Battery Powered Widgets * Instrumentation * Electronic Scales * Cordless Phones Functional Block Diagram Typical Circuit SL2136 http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 1 of 4 SL2136 CMOS Elektronische Bauelemente Positive Voltage Regulator Absolute Maximum Ratings Parameter Input Max Voltage Symbol Ratings Unit VIN 8 V Output Current IOUT 1 A Output Voltage VOUT 1.3~3.8 V V Supply Voltage VIN 4.5~5.5 Operating Ambient Temperature Topr -40 ~ +85 Junction Temperature Maximum Junction Temperature Thermal Resistance Power Dissipation( T=100 ) Tj -40 ~ +125 Tj Max 150 jc 15 /W ja 160 /W PD 625 mW EDS Classification B Electrical Characteristics Ta=25 Parameter Output Voltage Output Current Current Limit Load Regulation Dropout Voltage unless otherwise noted Symbol VOUT (E) VIN=VOUT(T)+1V, IO=1mA -1.5% IO VIN=VOUT(T)+2V, VOUT VOUT(E)*0.96 600 ILIM REGLOAD VO>1.2V (Note1) VDROPOUT Condition Min VIN=VOUT(T)+2V, IO=1mA to 600mA Line Regulation IQ REGLINE Over Temperature Shutdown Over Temperature Hysterisis Output Voltage Temperature Coefficient Short Circuit Current(Note4) Power Supply Rejection 1.5% V - - mA 600 800 - mA % (Note2) - 0.2 1 - - 1900 IO=600mA 1.4V<VOUT(T) VO=VOUT(E)-2% 2.0V<VOUT(T) 2.0V - - 1400 2.8V - - 800 - - 600 VIN= VOUT(T)+1V, IO=0mA - 30 50 1.3V VOUT(T) 1.4V IO=1mA (T)+1 to 1.4V<VOUT(T) 2.0V VIN=VOUT(T)+1 to VOUT(T)+2 2.0V<VOUT(T)<4 -0.2 - 0.2 -0.15 - 0.15 -0.1 0.02 0.1 -0.4 0.2 0.4 VIN OTS OTH Note3 - 7 - 150 - - 30 - TC - 30 - - 300 600 ISC VIN=VOUT(T)+1V, VOUT<0.8V PSRR Io=100mA Co=2.2 F eN f=10Hz~100kHz Io=10mA, CBYP=0 F Output Voltage Noise Unit 1.4V 4.0V VOUT(T) Input Voltage Max 1.3V VOUT(T) 2.8V<VOUT(T) Quiescent Current TYP VOUT(T) f=100Hz - 60 - f=1kHz - 50 - f=10kHz - 20 - Co=2.2 F - 30 - mV A % V ppm/ mA dB Vrms Note 1: VOUT (E) =Effective Output Voltage (i.e. the output voltage when “VOUT (T) + 1.0V” is provided at the VIN pin while maintaining a certain IOUT value). 2: VOUT (T) =Specified Output Voltage 3: V IN (MIN) =VOUT+V DROPOUT 4: To prevent the Short Circuit Current protection feature from being prematurely activated, the input voltage must be applied before a current source load is applied. http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 2 of 4 SL2136 CMOS Elektronische Bauelemente Positive Voltage Regulator Ordering Information(contd.) Part Number SL2136-13 SL2136-18 SL2136-27 SL2136-29 SL2136-31 SL2136-34 SL2136-36 SL2136-38 Marking 6T132 XXXX 6T182 XXXX 6T272 XXXX 6T292 XXXX 6T312 XXXX 6T342 XXXX 6T362 XXXX 6T382 XXXX Output Voltage Part Number 1.3V SL2136-15 1.8V SL2136-25 2.7V SL2136-28 2.9V SL2136-30 3.1V SL2136-33 3.4V SL2136-35 3.6V SL2136-37 Marking Output Voltage 6T152 XXXX 6T252 XXXX 6T282 XXXX 6T302 XXXX 6T332 XXXX 6T352 XXXX 6T372 XXXX 1.5V 2.5V 2.8V 3.0V 3.3V 3.5V 3.7 V 3.8V Characteristics Curve (T)+1 to h tp://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 3 of 4 SL2136 Elektronische Bauelemente http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A CMOS Positive Voltage Regulator Any changing of specification will not be informed individual Page4 of 4