SP20200 VOLTAGE 200V Elektronische Bauelemente 20.0 AMP Schottky Barrier Rectifiers RoHS Compliant Product A suffix of "-C" specifies halogen & lead-free ITO-220 FEATURES . Low forward voltage drop . High current capability . High reliability . High surge current capability . Epitaxial construction 10 0.5 0.2 0.1 3.2 4.5 0.2 0.3 0.2 13Min 0.2 1.3 3.7 MECHANICAL DATA 2.54 0.2 . Case: Molded plastic . Epoxy: UL 94V-0 rate flame retardant . Lead: Lead solderable per MIL-STD-202, 0.3 15 2.7 0.2 2.8 0.7 2.54 0.2 0.5 2.6 0.2 0.2 0.2 PIN 1 PIN 3 CASE PIN 2 Dimensions in millimeters method 208 guaranteed . Polarity: As Marked . Mounting position: Any . Weight: 2.24 grams(Approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 oC ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, See Fig. 1 Peak Forward Surge Current, 8.3 ms single half Sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage (IF = 10 Amps, TA = 25 C ) Maximum Instantaneous Forward Voltage (IF = 10 Amps, TA = 125 C ) Maximum DC Reverse Current Ta=25 к! At Rated DC Blocking Voltage Ta=125 к! Typical Junction Capacitance (Note 1) Typical Thermal Resistance RșJA (Note 2) Operating Temperature Range TJ Storage Temperature Range TSTG NOTES: 1. Measured at 1MHz and applied reverse voltage of 5.0V D.C. 2. Thermal Resistance Junction to Case. O O http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A SP20200 200 200 200 UNITS V V V 20.0 A 180 A 0.95 0.80 0.02 10 350 2.0 -50 ~ +150 -65 ~ +175 V mA pF к/W к к Any changing of specification will not be informed individual Page 1 of 2 SP20200 VOLTAGE 200V 20 .0AMP Schottky Barrier Rectifiers Elektronische Bauelemente RATING AND CHARACTERISTIC CURVES Typical Forward Current Derating Curve Typical Forward Characteristic 100 Instantaneous Forward Current (A),Per Leg Average Forward Current (A); per Leg 15 10 5 0 20 50 100 150 190 Tc, Case Temperature (℃) 10 125℃ 75℃ 25℃ 1 Typical Junction Capacitance 0.1 0.4 800 0.5 0.7 0.6 0.8 0.9 1.0 Junction Capacitance (pF) Forward Voltage (V) 600 400 Typical Reverse Characteristic 200 100 125℃ 0 100 10 1 0.1 100℃ Revise Voltage (%) 10 Reverse Current(uA) Maximum Non- Repetitive Forward Surge Current Peak Forwad surge Current (A) 200 160 Tj=25℃ 8.3mS Single half Sine Wave JEDEC Method 75℃ 1 120 50℃ 0.1 80 25℃ 40 0.01 10 40 80 120 18 220 Reverse Voltage(V) 0 0 10 100 Number of Cycles at 60Hz http://www.SeCoSGmbH.com 01-Jun-2006 Rev. A Any changing of specification will not be informed individua l Page 2 of 2