BR10 THRU BR1010 10A SINGLE-PHASE SILICON BRIDGE RECTIFIERS Features • Surge overload rating-200 amperes peak • Low forward voltage drop • Small size; simple installation • Silver Plated Copper leads • Mounting Position: Any • Ceramic case Absolute Maximum Ratings and Characteristics Rating at 25oC ambient temperature unless otherwise specified. For capacitive load, derate current by 20%. BR1005 BR101 BR102 BR104 BR106 BR108 BR1010 Units Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V Maximum RMS Voltage 35 70 140 280 420 560 700 V TC = 50 OC O TC =100 C* O TA = 50 C** 10 6 6 A A A Peak Forward Surge Current, 8.3ms single half sine-wave superimposed on rated load 200 A Maximum Forward Voltage Drop per element at 5A Peak 1.1 V 10 1 uA mA Maximum Average Forward Rectified Output Current at Maximum Reverse Current at Rated DC Blocking Voltage per element TA = 25 OC O TA = 100 C Operating Temperature Range TC Storage Temperature Range TA -55 to +125 O C -55 to +125 O C Notes: * Unit mounted on metal chassis ** Unit mounted on P.C. board SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 11/11/2002 BR10 THRU BR1010 RATINGS AND CHARACTERISTIC CURVES (BR10 SERIES) FIG.1-MAXIMUM FORWARD SURGE CURRENT FIG.2-DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 200 150 100 50 0 0 100 10 NUMBEROF CYCLES AT 60 Hz AVERAGE FORWARD OUTPUT CURRENT AMPERES PEAK FORWARD SURGE CURRENT AMPERES 250 10 HEAT SINK MOUNTING Tc 8 6 4 2 0 0 150 100 50 o TEMPERATURE. ( C) FIG.3-TYPICAL FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS 100 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT AMPERES 10 1.0 0.1 1.0 0.1 0.01 0 20 40 60 80 100 120 140 0.01 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 INSTANTEOUS FORWARD VOLTAGE,VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 11/11/2002