BYV26A THRU BYV26E SUPER FAST RECTIFIERS Reverse Voltage - 200 to 1000 V Forward Current - 1 A Features • Low cost • Diffused junction • Low forward voltage drop • High current capability Mechanical Data • Case: Molded plastic, DO-41 • Lead: Axial leads, solderable per MIL-STD-202, Method 208 • Polarity: Color band denotes cathode end • Mounting Position: Any Maximum Ratings and Electrical Characteristics Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half-wave, 50 Hz, resistive or inductive load, for capacitive load, derate current by 20%. Parameter Symbols BYV26A BYV26B BYV26C BYV26D BYV26E Units Maximum Recurrent Peak Reverse Voltage VRRM 200 400 600 800 1000 V Maximum RMS Voltage VRMS 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 200 400 600 800 1000 V Maximum Average Forward Rectified Current 0.375" (9.5 mm) Lead Length at TA = 75 OC IF(AV) 1 A Peak Forward Surge Current 10 ms Single Half Sine Wave Superimposed on Rated Load at TJ = 125 OC IFSM 30 A VF 2.5 V IR 5 150 µA Maximum Forward Voltage at 1 A Maximum Reverse Current at Rated DC Blocking Voltage Maximum Reverse Recovery Time 1) Typical Junction Capacitance Typical Thermal Resistance 2) 3) Operating Junction temperature range Storage temperature range O TA = 25 C TA = 100 OC trr 30 75 CJ 45 40 ns pF C/W RθJA 100 Tj - 55 to + 150 O Tstg - 55 to + 150 O O C C 1) Reverse recovery test conditions: IF = 0.5 A, IR = 1 A, Irr = 0.25 A. Measured at 1 MHz and applied reverse voltage of 4 V D.C. 3) Thermal resistance from junction to ambient. 2) SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 08/01/2009 B BYV26A THRU BYV26E SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 08/01/2009 B