DB101S THRU DB107S SINGLE-PHASE GLASS PASSIVATED SILICON SURFACE MOUNT BRIDGE RECTIFIER Reverse Voltage – 50 to 1000 V Forward Current – 1 A Features • High surge overload rating of 50 A peak • Ideal for printed circuit board • Low forward voltage drop • Glass passivated chip junction Mechanical Data • Case: Molded plastic, DB-S • Epoxy: UL 94V-0 rate flame retardant • Terminal: Leads solderable per MIL-STD-202, method 208 guaranteed • Mounting position: Any Maximum Ratings and Electrical Characteristics Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20%. Symbols DB101S Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current I(AV) 1 A IFSM 50 A VF 1.1 V Parameter at TA = 40 OC 2) Peak Forward Surge Current 8.3 ms Single Half-sine -wave Superimposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 1 A DC DB102S DB103S DB104S DB105S DB106S DB107S O Maximum Reverse Current TA = 25 C at Rated DC Blocking Voltage TA = 125 OC Typical Junction Capacitance Typical Thermal Resistance 2) Typical Thermal Resistance 2) 1) Operating and Storage Temperature Range IR CJ Units 5 µA 500 25 pF 40 O RθJL 15 O TJ ,TS -55 to +150 RθJA C/W C/W O C 1) Measured at 1 MHz and applied reverse voltage of 4 V DC. 2) Units mounted P.C.B. with 0.5 X 0.5" (13 X 13 mm) copper pads. SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 12/04/2006 H DB101S THRU DB107S SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 12/04/2006 H