RPU/RPO Specials Pressure sensors with special fittings FEATURES · 0...50 mbar to 0...16 bar, 0.5 psi to 250 psi, gage or differential pressures · High impedance bridge · Miniature packages · Different pinning configurations · Usable for wet/wet applications1 MEDIA COMPATIBILITY1 All media compatible with port 1: - polyetherimide - silver-filled silicone - silicon nitride port 2: - polyetherimide - fluor-silicone - silicon SPECIFICATIONS and ELECTRICAL CONNECTION PRESSURE SENSOR CHARACTERISTICS +Vs 1 See individual data sheets for RPU and RPO series 4 - Output Specification notes: 2 1. P1 of all "gage" devices are normally vented to atmosphere. P1 and P2 of differential devices might be used for "wet-wet" applications, but the media must be compatible with the materials specified under "MEDIA COMPATIBILITY". E / 11704 / A + 3 1/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings OUTLINE DRAWINGS FOR GAGE DEVICES RP...G6B (Barbed, pinning 1 x 4) Notch Pin 1 4x1,02 4x0,5 11,7 7,9 12,7 2,29 1,27 3x2,54 Ø4,7 Ø3,2 20,4 P2 8,9 4x0,41 third angle projection mass: 2 g Ø4,1 RP...G2B (Barbed, pinning 2 x 2) 12,7 dimensions in mm 8,4 third angle projection 4 7,9 3 7,9 2 1 Ø4,7 Ø3,2 7,9 8,9 20,4 P2 6,3 Notch Pin 1 mass: 2 g E / 11704 / A 4x 1,02 5,08 4x0,41 2,54 4x0,5 dimensions in mm 2/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings OUTLINE DRAWINGS FOR GAGE DEVICES RP...G6C (Luer, pinning 1 x 4) Notch Pin 1 4x1,02 11,7 7,9 12,7 2,29 4x0,5 1,27 3x2,54 Ø4,6 Ø2,0 18,8 P2 8,9 4x0,41 third angle projection mass: 2 g 7,9 Ø4,6 2RP...G2C (Luer, pinning 2 x 2) 12,7 4 7,9 3 dimensions in mm 2 1 Ø4,6 Ø4,0 7,9 Ø2,0 20,4 P2 6,3 8,9 Notch Pin 1 mass: 2 g E / 11704 / A 4x 1,02 5,08 4x0,41 2,54 4x0,5 8,4 third angle projection dimensions in mm 3/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings OUTLINE DRAWINGS FOR GAGE DEVICES RP...G6D (Modular, pinning 1 x 4) Ø1,27 Notch Pin 1 4x1,02 4x0,5 11,7 7,9 12,7 2,29 1,27 3x2,54 P2 7,9 8,9 4x0,41 third angle projection mass: 2 g dimensions in mm P1 RP...G2D (Modular, pinning 2 x 2) 12,7 4 7,9 3 2 1 7,9 P2 6,3 8,9 Notch Pin 1 mass: 2 g E / 11704 / A 4x 1,02 5,08 4x0,41 2,54 4x0,5 8,4 P1 third angle projection dimensions in mm 4/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings OUTLINE DRAWINGS FOR FLOW THROUGH HOUSINGS RP...G6G (Barbed, pinning 1 x 4) Notch Pin 1 4x1,02 P2 4x0,5 11,7 7,9 P2 2,29 1,27 3x2,54 2 x 5,1 7,1 8,9 1,78 2 x Ø3,5 2 x 8,9 12,7 P1 2 x Ø2,3 2 x 0,41 1,8 R3,2 25,6 third angle projection 4 x 2,8 4 x 15,4 mass: 2 g RP...G2G (Barbed, pinning 2 x 2) dimensions in mm P2 4 2 1 7,9 3 P2 25,6 R3,2 E / 11704 / A 5,08 P1 8,4 2 x Ø2,3 2x 0,41 2 x Ø3,5 Notch Pin 1 2,54 4x0,5 4 x 6,1 4x 1,02 7,1 8,9 6,3 mass: 2 g 2 x 8,9 2 x 5,1 12,7 Ø1,78 third angle projection dimensions in mm 5/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings OUTLINE DRAWINGS FOR GAGE DEVICES RP...G6H (M5 thread, pinning 1 x 4) Ø1,3 7,9 12,7 Notch Pin 1 4x1,02 4x0,5 11,7 Tightening torque3: Max. 67 Ncm 2,29 1,27 3x2,54 M5 7,9 Ø7,2 12,7 P2 3,5 21,6 Ø1,3 third angle projection 4x0,41 mass: 2 g dimensions in mm RP...G2H (M5 thread, pinning 2 x 2) 12,7 4 7,9 3 Tightening torque3: Max. 67 Ncm 2 1 M5 7,9 Ø7,2 P2 3,5 21,6 12,7 Ø1,3 6,3 Notch Pin 1 mass: 2 g 4x 1,02 4x0,41 2,54 4x0,5 third angle projection 8,4 dimensions in mm 5,08 Specification note: 3. Recommended O-ring: Ø 3,68 x 1,78, SH70, recommended counter bore dimensions: Ø 7,62 x 1,02 deep E / 11704 / A 6/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings OUTLINE DRAWINGS FOR GAGE DEVICES RP...G6I (90° port, pinning 1 x 4) 3,6 Notch Pin 1 4x1,02 11,7 7,9 P2 12,7 Ø5,1 Ø2,0 2,29 4x0,5 1,27 3x2,54 P2 9,1 14,6 1,3 8,0 4x0,41 mass: 2 g P1 12,7 RP...G2I (90° port, pinning 2 x 2) third angle projection dimensions in mm 7,9 3,6 P2 4 2 1 7,9 3 12,7 Ø5,1 Ø2,0 6,3 mass: 2 g E / 11704 / A 8,0 7,9 4x 1,02 5,08 Notch Pin 1 2,54 4x0,5 9,7 P2 9,1 14,6 1,3 12,7 third angle projection 4x 0,41 8,4 dimensions in mm 7/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings OUTLINE DRAWINGS FOR GAGE DEVICES RP...G6J (Needle, pinning 1 x 4) Notch Pin 1 4x1,02 4x0,5 11,7 7,9 12,7 2,29 1,27 3x2,54 22,1 Ø6,4 Ø1,78 Ø0,5 P2 4x0,41 third angle projection P1 mass: 2 g RP...G2J (Needle, pinning 2 x 2) 12,7 dimensions in mm 4 7,9 3 7,9 2 1 Ø6,4 Ø1,78 Ø0,5 22,1 P2 Notch Pin 1 6,3 8,9 mass: 2 g E / 11704 / A 7,9 4x 1,02 5,08 4x 0,41 2,54 4x0,5 8,4 P1 third angle projection dimensions in mm 8/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings OUTLINE DRAWINGS FOR GAGE DEVICES RP...G6K (Inverse 90° port, pinning 1 x 4) Notch Pin 1 2,29 Ø5,1 Ø2,0 9,7 4x0,41 mass: 2 g P1 third angle projection dimensions in mm 4 7,9 12,7 7,9 1,8 12,7 3 3,6 P2 7,9 8,0 9,1 14,6 1,3 4x0,5 RP...G2K (Inverse 90° port, pinning 2 x 2) 11,7 7,9 12,7 6,3 mass: 2 g E / 11704 / A 4x 1,02 5,08 8,0 Notch Pin 1 P2 3,6 P2 9,7 Ø5,1 Ø2,0 1 16,0 9,1 14,6 1,3 2 4x0,41 2,54 4x0,5 8,4 12,7 third angle projection P1 dimensions in mm 9/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings OUTLINE DRAWINGS FOR GAGE DEVICES 12,7 Notch Pin 1 4x1,02 Tightening torque3: Max. 135 Ncm 4x0,5 11,7 7,9 RP...G 6M (¼-28 UNF thread, pinning 1 x 4) 2,29 1,27 3x2,54 Ø1,3 Ø5,0 Ø9,1 1/4-28UNF 15,7 12,4 8,9 23,9 P2 4x0,41 third angle projection mass: 2 g dimensions in mm 7,9 RP...G 2M (¼-28 UNF thread, pinning 2 x 2) 12,7 4 7,9 3 Tightening torque3: Max. 135 Ncm 2 1 1/4-28UNF Ø1,3 Ø5,0 Ø9,1 7,9 15,7 12,4 8,9 6,3 23,9 P2 mass: 2 g 4x 1,02 Notch Pin 1 4x0,41 8,4 third angle projection 2,54 4x0,5 dimensions in mm 5,08 Specification note: 3. Recommended O-ring: Ø 5,28 x 1,78, SH70, recommended counter bore dimensions: Ø 9,14 x 1,78 deep E / 11704 / A 10/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings OUTLINE DRAWINGS FOR GAGE DEVICES 12,7 4x1,02 Notch Pin 1 4x0,5 2,29 11,7 7,9 RP...G6S (Manifold, pinning 1 x 4) 1,27 3x2,54 P2 8,4 13,7 8,9 3,05 1,27 Ø1,27 Ø6,35 Ø9,1 4x0,41 third angle projection P1 7,9 mass: 2 g RP...G2S (Manifold, pinning 2 x 2) 12,7 4 7,9 3 dimensions in mm 2 1 8,9 6,3 4x 1,02 Notch Pin 1 2,54 4x0,5 mass: 2 g E / 11704 / A P2 7,9 8,4 13,7 1,27 3,05 Ø1,27 Ø6,35 Ø9,1 5,08 P1 4x0,41 8,4 third angle projection dimensions in mm 11/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings ORDERING INFORMATION - AVAILABLE LISTINGS Note: Preferred listings are highlighted in grey B A R B E D Pressure range 35 50 100 250 mbar mbar mbar mbar 1 bar 2 bar 5 bar 10 bar 16 bar 0.5 psi 1 p si 5 p si 1 5 p si 3 0 p si 6 0 p si 1 0 0 p si 2 5 0 p si 35 50 100 250 mbar mbar mbar mbar 1 bar 2 bar 5 bar 10 bar 16 bar 0.5 psi 1 p si 5 p si 1 5 p si 3 0 p si 6 0 p si 1 0 0 p si 2 5 0 p si E / 11704 / A P O R T ( R P . . . B ) Compensated / Gage pressure Single inline pinning Dual inline pinning RPUM050G6B RPUM100G6B RPUM250G6B RPUB005G6B RPUB010G6B RPUB016G6B RPUP0X5D6B RPUP001G6B RPUP005G6B RPUP030D6B RPUP100G6B RPUP250G6B RPUM035G2B RPUM050G2B RPUM100G2B RPUM250G2B RPUP0X5G2B RPUP001G2B RPUP005G2B - L U E R Pressure range P R E S S U R E Uncompensated / Gage pressure P R E S S U R E P O R T Single inline pinning Dual inline pinning RPOM250G6B RPOB001G6B RPOB002G6B - - RPOP005G6B RPOP015G6B RPOP030G6B - RPOB001G2B RPOB002G2B RPOP015G2B RPOP030G2B - ( R P . . . C ) Uncompensated / Gage pressure Compensated / Gage pressure Single inline pinning Dual inline pinning Single inline pinning Dual inline pinning - - - RPOM050G2C RPOM100G2C RPOP001G2C - 12/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings ORDERING INFORMATION - AVAILABLE LISTINGS (cont.) Note: Preferred listings are highlighted in grey M O D U L A R Pressure range 35 50 100 250 mbar mbar mbar mbar 1 bar 2 bar 5 bar 10 bar 16 bar 0.5 psi 1 p si 5 p si 1 5 p si 3 0 p si 6 0 p si 1 0 0 p si 2 5 0 p si E / 11704 / A ( R P . . . D ) Compensated / Gage pressure Dual inline pinning Single inline pinning Dual inline pinning RPUB001G6D RPUP015G6D - - - - mbar mbar mbar mbar 1 bar 2 bar 5 bar 10 bar 16 bar 0.5 psi 1 p si 5 p si 1 5 p si 3 0 p si 6 0 p si 1 0 0 p si 2 5 0 p si Pressure range P O R T Single inline pinning 35 50 100 250 S M A L L P R E S S U R E Uncompensated / Gage pressure F L O W T H R O U G H P R E S S U R E Uncompensated / Gage pressure P O R T ( R P . . . G ) Compensated / Gage pressure Single inline pinning Dual inline pinning Single inline pinning Dual inline pinning - - RPOM050G6G RPOM100G6G RPOB001G6G RPOB002G6G RPOB005G6G RPOP001G6G RPOP015G6G RPOP030G6G RPOP100G6G - RPOM250G2G RPOB002G2G RPOP005G2G RPOP030G2G - 13/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings ORDERING INFORMATION - AVAILABLE LISTINGS (cont.) Note: Preferred listings are highlighted in grey M 5 Pressure range 35 50 100 250 mbar mbar mbar mbar 1 bar 2 bar 5 bar 10 bar 16 bar 0.5 psi 1 p si 5 p si 1 5 p si 3 0 p si 6 0 p si 1 0 0 p si 2 5 0 p si T H R E A D 35 50 100 250 mbar mbar mbar mbar 1 bar 2 bar 5 bar 10 bar 16 bar 0.5 psi 1 p si 5 p si 1 5 p si 3 0 p si 6 0 p si 1 0 0 p si 2 5 0 p si E / 11704 / A P O R T ( R P . . . H ) Compensated / Gage pressure Single inline pinning Dual inline pinning Single inline pinning Dual inline pinning RPUB001G6H RPUB005G6H RPUB010G6H RPUB016G6H RPUP015G6H RPUP100G6H RPUP250G6H RPUB001G2H RPUB005G2H RPUP015G2H RPUP100G2H - RPOM050G6H RPOM100G6H RPOM250G6H RPOB001G6H RPOB005G6H RPOP001G6H RPOP005G6H RPOP015G6H RPOP100G6H - RPOM050G2H RPOM100G2H RPOB005G2H RPOP001G2H RPOP100G2H - N E E D L E Pressure range P R E S S U R E Uncompensated / Gage pressure P R E S S U R E P O R T Uncompensated / Gage pressure ( R P . . . J ) Compensated / Gage pressure Single inline pinning Dual inline pinning Single inline pinning Dual inline pinning RPUM035G6J RPUM050G6J RPUP0X5G6J RPUP001G6J - RPUM050G2J RPUM100G2J RPUP001G2J - RPOB001G6J RPOB002G6J RPOB005G6J RPOP015G6J RPOP030G6J RPOP100G6J - - 14/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings ORDERING INFORMATION - AVAILABLE LISTINGS (cont.) Note: Preferred listings are highlighted in grey R E V E R S E Pressure range E / 11704 / A ( R P . . . K ) Compensated / Gage pressure Dual inline pinning Single inline pinning Dual inline pinning - - RPOM050G2K RPOM100G2K RPOP001G2K - U N F P R E S S U R E 1 / 4 " - 2 8 mbar mbar mbar mbar 1 bar 2 bar 5 bar 10 bar 16 bar 0.5 psi 1 p si 5 p si 1 5 p si 3 0 p si 6 0 p si 1 0 0 p si 2 5 0 p si P O R T - mbar mbar mbar mbar 1 bar 2 bar 5 bar 10 bar 16 bar 0.5 psi 1 p si 5 p si 1 5 p si 3 0 p si 6 0 p si 1 0 0 p si 2 5 0 p si 35 50 100 250 P R E S S U R E Single inline pinning 35 50 100 250 Pressure range 9 0 ° Uncompensated / Gage pressure P O R T Uncompensated / Gage pressure Single inline pinning Dual inline pinning RPUB005G6M RPUB010G6M RPUB016G6M RPUP100G6M RPUP250G6M - ( R P . . . M ) Compensated / Gage pressure Single inline pinning Dual inline pinning RPOM050G6M RPOM100G6M RPOM250G6M RPOB001G6M RPOB002G6M RPOB005G6M RPOB010G6M RPOB016G6M RPOB005G2M - RPOP001G6M RPOP005G6M RPOP015G6M RPOP030G6M RPOP100G6M RPOP250G6M RPOP100G2M - 15/16 www.sensortechnics.com RPU/RPO Specials Pressure sensors with special fittings ORDERING INFORMATION - AVAILABLE LISTINGS (cont.) Note: · Absolute and differential pressure versions are available on special request · Different sealing options (e.g. EPDM, Neoprene, Silicone, Viton) are available on special request Please contact your nearest Sensortechnics sales representative for further information. Sensortechnics PRO services: · Extended guarantee period of 2 years · Improved performance characteristics · Custom product modifications and adaptations even for small quantities · Advanced logistics models for supply inventory and short delivery times · Technical support through application engineers on the phone or at your site · Fastest possible technical response for design and QA engineers ... plus other services on request Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. E / 11704 / A 16/16 www.sensortechnics.com