Pb Free Customer: SPECIFICATION ITEM MODEL REVISION DATE CHIP LED DEVICE THBTGFR421-KR 080102 [Contents] 1. Features 2. Absolute maximum ratings 3. Electro-optical characteristics 4. Soldering profile 5. Outline dimension 6. Packing 7. Reel packing structure 8. Label Structure 9. Rank Division 10. Precaution for use Customer Approved by Approved by Approved by Supplier Drawn by SSC-QP-0401-06(REV.0) Checked by Approved by SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 1/8 - Seoul Semiconductor SSC-HBTGFR421-KR 1. Features *Top view type full-color lighting chip LED *Package : 1.6×1.5×0.5mm, flat molding Type 2. Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Color Red Green Blue Red Green Blue Red Green Blue Value 72 76 70 30 Power Dissipation Pd Forward Current IF Peak Forward Current IFM*1 Reverse Voltage VR 5 V Operating Temperature Topr -30 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ 20 Unit Remarks ㎽ ㎃ 50 35 ㎃ *1 IFM conditions: Pulse width Tw≤ 0.1ms, Duty ratio≤ 1/10 3. Electro-optical Characteristics (Ta=25℃) Parameter Symbol Forward Voltage VF IF=10㎃ Reverse Current IR VR=5V Luminous Intensity*2 IV IF=10㎃ Dominant Wavelength λ d IF=20㎃ Spectral Bandwidth Δλ IF=20㎃ 2θ IF=20㎃ Viewing angle*3 1/2 Condition Color Red Green Blue Red Green Blue Red Green Blue Red Green Blue Red Green Blue Red Green Blue Min 1.7 2.7 2.7 45 90 25 615 515 465 - Typ 1.9 3.0 3.0 0.1 0.1 0.1 65 160 60 625 525 470 20 35 25 150 150 150 Max 2.3 3.3 3.3 10 10 10 85 270 85 635 535 475 - Unit V ㎂ mcd ㎚ ㎚ ˚ *2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *3 θ 1/2 is the off-axis where the luminous intensity is 1/2 the peak intensity. [Note] All products confirm to the listed minimum and maximum specifications for electric and optical characteristics, when operated at 20mA within the maximum ratings shown above. All measurements were made under the standardized environment of SSC. (Tolerance: VF ±0.1V, IV ±10%, λd ±2nm) SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 2/8 - SSC-HBTGFR421-KR 4. Soldering Profile Reflow Soldering Conditions/ Profile (1) Lead Solder -Preliminary heating to be at 150℃max. for 2 minutes max. -Soldering heat to be at 240℃max. for 5 seconds max. LED Surface temperature °C Operation heating 240 150 Pre-heating Temperature rise: 5°C/sec. Cooling: -5°C/sec. ~ 120 0 60 to 120 sec. 5sec. max (2) Lead Free Solder -Preliminary heating to be at 150℃max. for 2 minutes max. -Soldering heat to be at 260℃max. for 10 seconds max. LED Surface temperature °C Operation heating 260 150 Pre-heating Temperature rise: 5°C/sec. Cooling: -5°C/sec. ~ 120 0 60 to 120 sec. 10 sec. (3) Hand Soldering conditions -Not more than 3 seconds @MAX280℃, under Soldering iron. SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 3/8 - SSC-HBTGFR421-KR Tolerance: ±0.1, Unit: ㎜ 5. Outline Dimension Blue Red Green Anode(Common) ±0.05 Cathode 6. Packing ±0.2 ±0.05 ±0.05 (2.75) 3.5 0.2 8.0 2.0 ±0.05 +0.1 -0 1.75 1.5 ±0.1 ±0.05 4.0 1.75 ±0.1 [Recommended Solder Pattern] ±0.05 4.0 ±0.1 1.73±0.05 0.5 0.7 ±0.05 11.4 180 +0 -3 9 ±0.3 60 +0.2 -0 2 ±0.2 22 13 ±0.2 Label Tolerance: ±0.2, (1) Quantity : 4000pcs/Reel Unit: ㎜ (2) Cumulative Tolerance : Cumulative Tolerance/10pitches to be ±0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10˚ angle to be the carrier tape. (4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 4/8 - SSC-HBTGFR421-KR 7. Reel Packing Structure Reel # # # # # # # # # # : N / P # 제품명 SSC-HBTGFR421 # # # # # # # # # o N t o L 수량 : 4000 Aluminum Vinyl Bag # # # # # # # # # # : N / P # 제품명 SSC-HBTGFR421 # # # # # # # # # o N t o L 수량 : 4000 Outer Box *Material: Paper(SW3B(B)) TYPE SIZE(mm) a 7inch 245 b 220 c 142 c CHIP LED 1 2 4 R F G T B H C S S : : E D O C T R A P b SSC-QP-0401-06(REV.0) D T L , . O C R O T C U D N O C I M E S L U O E S a A E 0 0 0 , 0 4 : : : O N E T T T Y O A ' Q L D CHIP LED SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 5/8 - SSC-HBTGFR421-KR 8. Label Structure # P/N : ########## 제품명 SSC-HBTGFR421-KR Lot No CAA071116#######-## 수량 : 4000 Bin(A~R) Day Month Year SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 6/8 - SSC-HBTGFR421-KR 9. Rank Divitsion λ[nm] (IF=20mA) VF[V] (IF=10mA) RED GREEN 2.70~2.90 BLUE RED GREEN 2.70~2.90 615~635 515~535 2.90~3.10 3.10~3.30 2.70~2.90 1.70~2.30 2.90~3.10 2.90~3.10 3.10~3.30 2.70~2.90 3.10~3.30 2.90~3.10 3.10~3.30 615~635 615~635 615~635 615~635 615~635 615~635 615~635 615~635 IV [mcd] (IF=10mA) RANK BLUE RED GREEN BLUE 465~470 45~85 90~270 25~85 01 470~477 45~85 90~270 25~85 02 465~470 45~85 90~270 25~85 03 470~477 45~85 90~270 25~85 04 465~470 45~85 90~270 25~85 05 470~477 45~85 90~270 25~85 06 465~470 45~85 90~270 25~85 07 470~477 45~85 90~270 25~85 08 465~470 45~85 90~270 25~85 09 470~477 45~85 90~270 25~85 10 465~470 45~85 90~270 25~85 11 470~477 45~85 90~270 25~85 12 465~470 45~85 90~270 25~85 13 470~477 45~85 90~270 25~85 14 465~470 45~85 90~270 25~85 15 470~477 45~85 90~270 25~85 16 465~470 45~85 90~270 25~85 17 470~477 45~85 90~270 25~85 18 515~535 515~535 515~535 515~535 515~535 515~535 515~535 515~535 (전압VF, 광도IV는 IF=10[mA], 파장λ는 IF=20[mA]에서의 인가 조건임.) SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 7/8 - SSC-HBTGFR421-KR 10. Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator) with a desiccant . Otherwise, to store them in the following environment is recommended. Temperature : 5℃~30℃ Humidity : 60%HR max. (2) Attention after opened However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. After opened and mounted, the soldering shall be quickly. Temperature : 5 ~ 40℃ b. Keeping of a fraction Humidity : less than 30% (3) In case of more than 1 week passed after opening or change color of indicator on desiccant components shall be dried 10-12hr. at 60±5℃. (4) In case of supposed the components is humid, shall be dried dip-solder just before. 100Hr at 80±5℃ or 12Hr at 100±5℃. (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. (6) Quick cooling shall not be avoid. (7) Components shall not be mounted on warped direction of PCB. (8) Anti radioactive ray design is not considered for the products listed here in. (9) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. (10) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (11) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (12) The LEDs must be soldered within seven days after opening the moisture-proof packing. (13) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (14) The appearance and specifications of the product may be modified for improvement without notice. (15) Static Electricity and surge damages the Blue/Green LEDs. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be properly grounded. (16) It is recommended to use individual resistor separately when the LEDs applies in parallel circuit so that it may improve the light deviations. (17) It is recommended to examine to the full the circuit by using resistor when the LEDs applies in case of lighting seven colors. (White colour is not available with single LED.) SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 8/8 - SSC-HBTGFR421-KR