Nov 14, 2006 1.0625～1.25Gbps GBIC Transceiver (For 50km transmission) Members Of FlexonTM Family Compatible with FCC 47 CFR Part 15, Class B Compatible with FDA 21 CFR 1040.10 and 1040.11, Class I RoHS compliance Description Features Fiberxon 1.0625~1.25Gbps GBIC transceivers are high performance, cost effective modules. They are designed for Gigabit Ethernet and 1x Fibre Channel 1.0625~1.25Gbps multi-rate applications from 50km. 1550nm DFB laser and PIN photodiode for 50 transmission The transceiver consists of two sections: The Class I laser product transmitter section incorporates a highly reliable Low EMI and excellent ESD protection uncooled DFB laser. And the receiver section is a Duplex SC optical interface PIN with a trans-impedance preamplifier (TIA). All Extended power supply +3.3/5.0V compatibility modules satisfy Class I Laser Safety requirements. Standard serial ID information compatible with SFF-8053 The standard serial ID information compatible with Operating case temperature: 0 to +70°C GBIC MSA describes the transceiver’s capabilities, standard Applications interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to Switch to Switch interface SFF-8053. Switched backplane applications Router/Server interface Other optical transmission systems Standard Compatible with GBIC specification (SFF-8053), Rev 5.5 Compatible with ANSI specification for Fibre Channel Compatible with IEEE 802.3z Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 1 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 2006-11-15 下午 04:56 1.25G GBIC Transceiver 50 km transmission Preliminary Datasheet Nov 14, 2006 Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of the documentation. Table 1 - Regulatory Compliance Feature Standard Electrostatic Discharge MIL-STD-883E (ESD) to the Electrical Pins Method 3015.7 Electrostatic Discharge (ESD) IEC 61000-4-2 to the Duplex LC Receptacle GR-1089-CORE Electromagnetic Interference (EMI) Immunity Performance Class 1(>500 V) Compatible with standards FCC Part 15 Class B EN55022 Class B (CISPR 22B) Compatible with standards VCCI Class B IEC 61000-4-3 Laser Eye Safety Component Recognition Compatible with standards FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 product. TUV Certificate No. 50030043 UL and CSA UL file E223705 2002/95/EC 4.1&4.2 RoHS Compatible with Class I laser Compliant with standards note 2005/747/EC Note: In light of item 5 in Annex of 2002/95/EC, “Pb in the glass of cathode ray tubes, electronic components and fluorescent tubes.” and item 13 in Annex of 2005/747/EC , “ Lead and cadmium in optical and filter glass.” ,the two exemptions are being concerned for Fiberxon’s transceivers, because Fiberxon’s transceivers use glass, which may contain Pb, for components such as lenses, windows, isolators, and other electronic components. Absolute Maximum Ratings Absolute Maximum Ratings are those values beyond which damage to the devices may occur. Table 2 – Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Storage Temperature TS -40 +85 °C Supply Voltage VCC -0.5 6 V - 5 95 % Operating Humidity Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 2 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 2006-11-15 下午 04:56 1.25G GBIC Transceiver 50 km transmission Preliminary Datasheet Nov 14, 2006 Recommended Operating Conditions Table 3 - Recommended Operating Conditions Parameter Symbol Min. Operating Case Temperature TC Power Supply Voltage VCC Power Supply Current ICC Max. Unit 0 +70 °C 3.1 5.5 V 300 mA Data Rate Typical 1.0625/1.25 Gbps FTM-5012S-G50G (1550nm DFB and PIN, 50km) Table 4 –Optical and Electrical Characteristics Parameter Symbol Min. Typical Max. Unit 1550 1580 nm 0 dBm 1 nm Notes Transmitter Centre Wavelength λC 1480 Average Output Power P0ut -5 Spectral Width (-20dB) ∆λ Side Mode Suppression Ratio Extinction Ration SMSR 30 dB EX 9 dB P0ut@TX Disable Asserted Rise/Fall Time (20%～80%) Total Jitter 1.25G 1.0625G Deterministic 1.25G Jitter 1.0625G tr/tf 0.26 ns 2 0.21 UI 3 UI IEEE 802.3z and ANSI Fibre Channel compatible VIN 650 Input Differential Impedance ZIN 140 150 4 2000 mV 160 Ω Disable 2.0 Vcc+0.3 V Enable 0 0.8 V Host_VCC-0.5 Host_Vcc+0.3 V 0 0.5 V 1620 nm -22 dBm Fault TX Fault 1 0.2 Data Input Swing Differential TX Disable dBm 0.43 DJ Output Optical Eye -45 0.431 TJ Normal 1 5 Receiver Centre Wavelength λC 1270 Receiver Sensitivity Receiver Overload 0 dBm Return Loss 12 dB LOS De-Assert LOSD LOS Assert LOSA LOS Hysteresis Total Jitter -24 -35 1 1.25G 1.0625G 1.25G TJ DJ 6 dBm dBm 4 0.749 0.61 0.462 dB UI UI Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 3 of 3 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 2006-11-15 下午 04:56 3 1.25G GBIC Transceiver 50 km transmission Deterministic Preliminary Datasheet 1.25G DJ Nov 14, 2006 0.462 UI mV Host_VCC-0.5 2000 0.36 Host_Vcc+0.3 0 0.5 V Jitter Deterministic Data Output Swing Differential 1.0625G Jitter High VOUT 370 Low 5 V Note: 1. The optical power is launched into SMF. 2. Unfiltered, measured with a PRBS 27-1 test pattern @1.25Gbps 3. Measured with a PRBS 27 –1 test [email protected], meet the specified maximum output jitter requirements if the specified maximum input jitter is present. 4. Measured with a PRBS 27 –1 test [email protected]. 5. PECL level, internally AC coupled and terminated. 6. Worst-case Extinction Ration, measured with a PRBS 27 –1 test [email protected], BER≤1×10-12. EEPROM Information The SFF-8053 defines a 256-byte memory map in EEPROM describing the transceiver’s capabilities, standard interfaces, manufacturer, and other information, which is accessible over a 2 wire serial interface at the 8-bit address 1010000X (A0h). The memory contents refer to Table 5 Table 5 - EEPROM Serial ID Memory Contents (A0h) Addr. Field Size (Bytes) Name of Field Hex Description 0 1 Identifier 01 GBIC 1 1 Ext. Identifier 04 MOD4 2 1 Connector 01 SC 3—10 8 Transceiver 00 00 00 02 10 10 01 01 11 1 Encoding 01 8B10B 12 1 BR, nominal 0D 1.25Gbps 13 1 Reserved 00 14 1 15 1 Length (9um) FF/FF 16 1 Length (50um) 00 17 1 Length (62.5um) 00 18 1 Length (copper) 00 19 1 Reserved 20—35 16 Vendor name 36 1 Reserved 37—39 3 Vendor OUI 40—55 16 Vendor PN 56—59 4 Vendor rev xx xx xx xx 60-61 2 Reserved 00 00 62 1 Reserved 00 Length (9um)-km 32 Transmitter Code 50km 00 46 49 42 45 52 58 4F 4E 20 49 4E 43 2E 20 20 20 “FIBERXON INC. “(ASCⅡ) 00 00 00 00 46 54 4D 2D 35 30 31 32 53 2D 47 35 30 47 20 20 “FTM-5012S-G50G ” (ASCⅡ) ASCⅡ( “31 30 20 20” means 1.0 revision) Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 4 of 4 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 2006-11-15 下午 04:56 1.25G GBIC Transceiver 50 km transmission Preliminary Datasheet 63 1 CC BASE xx 64—65 2 Options 00 1A 66 1 BR, max 00 67 1 BR, min 00 68—83 16 Vendor SN 84—91 8 92—94 1 Reserved 00 95 1 CC_EXT xx 96—255 160 Vendor specific Nov 14, 2006 Check sum of bytes 0 - 62 LOS, TX_FAULT and TX_DISABLE xx xx xx xx xx xx xx xx ASCⅡ xx xx xx xx xx xx xx xx Vendor date codexx xx xx xx xx xx 20 20 Year (2 bytes), Month (2 bytes), Day (2 bytes) Check sum of bytes 64 - 94 Note: The “xx” byte should be filled in according to practical case. For more information, please refer to the related document of SFF-8053 Rev 5.5. Recommended Interface Circuit Figure 1 shows the recommended interface circuit. Host Board GBIC Module DC +5V VDDT 4.7K to 10KΩ 4.7K to 10KΩ TX_DISABLE DC +5V TX_FAULT PECL Note A SerDat Out + Z=75Ω + TX_DAT SerDat Out - Z=75Ω - TX_DAT SerDat In - Z=75Ω - RX_DAT SerDat In + Z=75Ω + RX_DAT Laser driver 150Ω 2×180Ω DC +5V 150Ω PECL Note B Amplifier DC +5V 4.7K to 10KΩ RX_LOS DC +5V 3×4.7K to 10KΩ MOD_DEF(2) EEPROM MOD_DEF(1) MOD_DEF(0) RGND Note A: Circuit assumes open emitter output Note B: Circuit assumes high impedance internal bias @Vcc-1.3V Figure 1, Recommended Interface Circuit Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 5 of 5 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 2006-11-15 下午 04:56 1.25G GBIC Transceiver 50 km transmission Preliminary Datasheet Nov 14, 2006 Pin Definitions Figure 2 below shows the pin numbering of GBIC electrical interface. The pin functions are described in Table 6. Figure 2, Pin View Table 6 – Pin Function Definitions Pin Name Pin # Name/Function Signal Specification RECEIVER SIGNALS RGND 2, 3, 11, 14 Receiver Ground (may be connected with TGND in GBIC) Receiver +3.3/5 volt VDDR 15 -RX_DAT 12 Receive Data, Differential PECL +RX_DAT 13 Receive Data, Differential PECL (may be connected with VDDT in GBIC) Ground, to GBIC Power, to GBIC High speed serial, from GBIC High speed serial, from GBIC Receiver Loss of Signal, logic high, open RX_LOS 1 collector compatible, 4.7k to 10kΩpull up to Low speed, from GBIC VDDT on host TRANSMITTER SIGNALS TGND 8, 9, 17, 20 Transmitter Ground (may be connected with RGND internally) Transmitter +3.3/5 volt VDDT 16 +TX_DAT 18 Transmit Data, Differential PECL -TX_DAT 19 Transmit Data, Differential PECL (may be connected with VDDR in GBIC) Ground, to GBIC Power, to GBIC High speed serial, to GBIC High speed serial, to GBIC Transmitter Disable, logic high, open collector TX_DISABLE 7 compatible, 4.7k to 10kΩpull up to VDDT on Low speed, to GBIC GBIC TX_FAULT 10 Transmitter Fault, logic high, open collector compatible, 4.7k to 10kΩpull up to VDDT on host Low speed, from GBIC Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 6 of 6 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 2006-11-15 下午 04:56 1.25G GBIC Transceiver 50 km transmission Preliminary Datasheet Nov 14, 2006 CONTROL SIGNALS MOD_DEF(0) 4 TTL low, output Please reference MOD_DEF(1) 5 SCL serial clock signal, input SFF-8053, Annex D: MOD_DEF(2) 6 SDA serial data signal, input/output Module definition “4” Mechanical Design Diagram The mechanical design diagram is shown in Figure 3. 65.60 57.30 30.30 12.99 8.30 3.05 1.70 9.90 11.90 27.95 25.50 30.50 33.20 12.75 37.48 Figure 3, Mechanical Design Diagram of GBIC(1550nm) Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 7 of 7 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 2006-11-15 下午 04:56 1.25G GBIC Transceiver 50 km transmission Preliminary Datasheet Nov 14, 2006 Ordering information FTM 5 0 1 2 Medium S G 50 Others G: RoHS compliance Receptacle S: SC 5: 1550nm Function 0: Standard G Distance 50: 50KM Data rate 12: 1.25Gbps Package G: GBIC Part No. Product Description FTM-5012S-G50G 1550nm, 1.0625~1.25Gbps, 50km, GBIC, 0°C~+70°C,RoHS compliance Related Documents For further information, please refer to the following documents: FlexonTM GBIC Installation Guide FlexonTM GBIC Application Notes SFF-8053, Proposed Specification for GBIC (Gigabit Interface Converter), Rev 5.5 Obtaining Document You can visit our website: http://www.fiberxon.com Or contact with Fiberxon, Inc. America Sales Office listed at the end of documentation to get the latest documents. Revision History Revision Rev. 1a Initiate Review Approve Henry.xiao Simon.Jiang Walker.Wei Subject Initial datasheet Release Date Nov 14, 2006 Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 8 of 8 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 2006-11-15 下午 04:56 1.25G GBIC Transceiver 50 km transmission Preliminary Datasheet Nov 14, 2006 © Copyright Fiberxon Inc. 2006 All Rights Reserved. All information contained in this document is subject to change without notice. The products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Fiberxon’s product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained in specific environments, and is presented as an illustration. The results obtained in other operating environment may vary. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN ”AS IS” BASIS. In no event will Fiberxon be liable for damages arising directly from any use of the information contained in this document. Contact U.S.A. Headquarter: 5201 Great America Parkway, Suite 340 Santa Clara, CA 95054 U. S. A. Tel: 408-562-6288 Fax: 408-562-6289 Or visit our website: http://www.fiberxon.com Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 9 of 9 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 2006-11-15 下午 04:56