April. 26, 2006 1.0625~1.25Gbps GBIC Transceiver (For 550m transmission) Members Of FlexonTM Family Standard Compatible with GBIC specification (SFF-8053), Rev 5.5 Compatible with ANSI specification for Fibre Channel Compatible with IEEE 802.3 Compatible with FCC 47 CFR Part 15, Class B Compatible with FDA 21 CF R 1040.10 and 1040.11, Class I RoHS compliant Features Description 1.0625~1.25Gbps multi-rate Fiberxon FTM-8012S-GG GBIC transceivers are 850nm VCSEL transmitter high performance, cost effective modules. They are 550m with 50/125 µm MMF designed for Gigabit Ethernet and 1x Fibre Channel 270m with 62.5/125 µm MMF at a distance of 270 meters with 62.5/125µm and Class I laser product 550 Low EMI and excellent ESD protection respectively. meters with 50/125µm multimode fiber Duplex SC optical interface Extended power supply +3.3/5.0V compatibility This transceiver incorporates a highly reliable Standard serial ID information compatible with 850nm VCSEL in its transmitter section. And the SFF-8053 receiver section consists of a PIN photodiode Operating case temperature: 0 to +70°C mounted together with a trans-impedance preamplifier (TIA). All modules satisfy Class I Laser Applications Safety requirements. The standard serial ID information compatible GBIC Switch to Switch interface MSA describes the Switched backplane applications standard Router/Server interface information. The host equipment can access this Other optical transmission systems information via the 2-wire serial CMOS EEPROM interfaces, transceiver’s capabilities, manufacturer and other protocol. For further information, please refer to SFF-8053. Fiberxon FTM-8012S-GG GBIC transceivers are compliant with RoHS. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 1 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 4/27/2006 9:53 AM 1.25G GBIC Transceiver 550m transmission, RoHS compliance April. 26, 2006 Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of the documentation. Table 1 - Regulatory Compliance Feature Standard Electrostatic Discharge MIL-STD-883E (ESD) to the Electrical Pins Method 3015.7 Electrostatic Discharge (ESD) IEC 61000-4-2 to the Duplex LC Receptacle GR-1089-CORE Electromagnetic Interference (EMI) Immunity Performance Class 1(>500 V) Compatible with standards FCC Part 15 Class B EN55022 Class B (CISPR 22B) Compatible with standards VCCI Class B IEC 61000-4-3 Compatible with standards FDA 21CFR 1040.10 and 1040.11 Compatible with Class I laser EN60950, EN (IEC) 60825-1,2 product. Component Recognition UL and CSA Compatible with standards RoHS 2002/95/EC 4.1&4.2 Compliant with standards Laser Eye Safety Absolute Maximum Ratings Absolute Maximum Ratings are those values beyond which damage to the devices may occur. Table 2 – Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Storage Temperature TS -40 +85 °C Supply Voltage VCC -0.5 6 V - 5 95 % Operating Humidity Recommended Operating Conditions Table 3 - Recommended Operating Conditions Parameter Symbol Min. Operating Case Temperature TC Power Supply Voltage VCC Power Supply Current ICC Data Rate Typical Max. Unit 0 +70 °C 3.1 5.5 V 300 mA 1.0625/1.25 Gbps Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 2 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 4/27/2006 9:53 AM 1.25G GBIC Transceiver 550m transmission, RoHS compliance April. 26, 2006 FTM-8012S-GG Table 4 –Optical and Electrical Characteristics Parameter Symbol Min. Typical Max. Unit Notes 850 860 nm -4 dBm 1 1 Transmitter Centre Wavelength λC 830 Average Output Power P0ut -9.5 P0ut@TX Disable Asserted P0ut -30 dBm σ 0.85 nm Spectral Width (RMS) Extinction Ratio EX Rise/Fall Time (20%~80%) tr/tf Total Jitter 1.25G 1.25G Jitter 1.0625G Output Optical Eye 0.26 0.431 0.43 0.2 DJ 0.21 VIN 200 Input Differential Impedance ZIN 140 TX Fault ns 2 UI 3 UI 3 IEEE 802.3 and ANSI Fibre Channel Compatible Data Input Swing Differential TX Disable dB TJ 1.0625G Deterministic 9 150 4 1660 mV 160 Ω 5 Disable 2.0 Vcc+0.3 V Enable 0 0.8 V Vcc-0.5 Vcc+0.3 V 0 0.5 V 860 nm -17 dBm 6 6 Fault Normal Receiver Centre Wavelength λC 770 Receiver Sensitivity Receiver Overload 0 dBm Return Loss 12 dB LOS De-Assert LOSD LOS Assert LOSA LOS Hysteresis Total Jitter -30 1 1.25G 1.0625G Deterministic 1.25G Jitter 1.0625G Data Output Swing Differential LOS -18 4 0.61 0.462 DJ VOUT dBm 0.749 TJ dBm 0.36 dB UI 3 UI 3 5 370 2000 mV High Vcc-0.5 Vcc+0.3 V Low 0 0.5 V Notes: 1. The optical power is launched into MMF. 2. Unfiltered, measured with a PRBS 27-1 test pattern @1.25Gbps 3. Meet the specified maximum output jitter requirements if the specified maximum input jitter is present. 4. Measured with a PRBS 27-1 test pattern @1.25Gbps/1.0625Gbps. 5. PECL logic, internally AC coupled. 6. Measured with a PRBS 27-1 test pattern @1.25Gbps, worst-case extinction ratio, BER ≤1×10-12. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 3 of 3 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 4/27/2006 9:53 AM 1.25G GBIC Transceiver 550m transmission, RoHS compliance April. 26, 2006 EEPROM Information The SFF-8053 defines a 256-byte memory map in EEPROM describing the transceiver’s capabilities, standard interfaces, manufacturer, and other information, which is accessible over a 2 wire serial interface at the 8-bit address 1010000X (A0h). The memory contents refer to Table 5 Table 5 - EEPROM Serial ID Memory Contents (A0h) Field Size Addr. (Bytes) Name of Field Hex Description 0 1 Identifier 01 GBIC 1 1 Ext. Identifier 04 MOD4 2 1 Connector 01 SC 3—10 8 Transceiver 00 00 00 01 20 40 0C 01 11 1 Encoding 01 8B10B 12 1 BR, nominal 0D 1.25Gbps 13 1 Reserved 00 14 1 Length (9um)-km 00 15 1 Length (9um) 00 16 1 Length (50um) 37 550m 17 1 Length (62.5um) 1B 270m 18 1 Length (copper) 00 19 1 Reserved 20—35 16 Vendor name 36 1 Reserved 37—39 3 Vendor OUI 40—55 16 Vendor PN 56—59 4 Vendor rev xx xx xx xx 60-61 2 Reserved 00 00 62 1 Reserved 00 63 1 CC BASE xx 64—65 2 Options 00 1A 66 1 BR, max 00 67 1 BR, min 00 68—83 16 Vendor SN 84—91 8 92—94 1 Reserved 00 95 1 CC_EXT xx 96—255 160 Vendor specific Transmitter Code 00 46 49 42 45 52 58 4F 4E 20 49 4E 43 2E 20 20 20 “FIBERXON INC. “(ASCⅡ) 00 00 00 00 46 54 4D 2D 38 30 31 32 53 2D 47 47 20 20 20 20 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx Vendor date codexx xx xx xx xx xx 20 20 “FTM-8012S-GG ” (ASCⅡ) ASCⅡ( “31 30 20 20” means 1.0 revision) Check sum of bytes 0 - 62 LOS, TX_FAULT and TX_DISABLE ASCⅡ Year (2 bytes), Month (2 bytes), Day (2 bytes) Check sum of bytes 64 - 94 Note: The “xx” byte should be filled in according to practical case. For more information, please refer to the related document of SFF-8053 Rev 5.5. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 4 of 4 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 4/27/2006 9:53 AM 1.25G GBIC Transceiver 550m transmission, RoHS compliance April. 26, 2006 Recommended Interface Circuit Figure 1 shows the recommended interface circuit. Host Board GBIC Module Vcc Vcc 10K Ω 2×4.7K to 10KΩ TX Disable TX Fault Protocol IC SERDES IC SerDat Out + Z=75Ω TD + SerDat Out - Z=75Ω TD - SerDat In + Z=75Ω SerDat In - Z=75Ω Laser driver RD + Amplifier RD - LOS Vcc 3×4.7K to 10KΩ MOD-DEF2 EEPROM MOD-DEF1 MOD-DEF0 RGND Figure 1, Recommended Interface Circuit Pin Definitions Figure 2 below shows the pin numbering of GBIC electrical interface. The pin functions are described in Table 6. Figure 2, Pin View Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 5 of 5 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 4/27/2006 9:53 AM 1.25G GBIC Transceiver 550m transmission, RoHS compliance April. 26, 2006 Table 6 – Pin Function Definitions Pin Name Pin # Name/Function Signal Specification RECEIVER SIGNALS RGND 2, 3, 11, 14 Receiver Ground (may be connected with TGND in GBIC) Receiver +3.3/5 volt VDDR 15 -RX_DAT 12 Receive Data, Differential PECL +RX_DAT 13 Receive Data, Differential PECL (may be connected with VDDT in GBIC) Ground, to GBIC Power, to GBIC High speed serial, from GBIC High speed serial, from GBIC Receiver Loss of Signal, logic high, open RX_LOS 1 collector compatible, 4.7k to 10kΩpull up to Low speed, from GBIC VDDT on host TRANSMITTER SIGNALS TGND 8, 9, 17, 20 Transmitter Ground (may be connected with RGND internally) Transmitter +3.3/5 volt VDDT 16 +TX_DAT 18 Transmit Data, Differential PECL -TX_DAT 19 Transmit Data, Differential PECL (may be connected with VDDR in GBIC) Ground, to GBIC Power, to GBIC High speed serial, to GBIC High speed serial, to GBIC Transmitter Disable, logic high, open collector TX_DISABLE 7 compatible, 4.7k to 10kΩpull up to VDDT on Low speed, to GBIC GBIC TX_FAULT 10 Transmitter Fault, logic high, open collector compatible, 4.7k to 10kΩpull up to VDDT on host Low speed, from GBIC CONTROL SIGNALS MOD_DEF(0) 4 TTL low, output Please reference MOD_DEF(1) 5 SCL serial clock signal, input SFF-8053, Annex D: MOD_DEF(2) 6 SDA serial data signal, input/output Module definition “4” Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 6 of 6 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 4/27/2006 9:53 AM 1.25G GBIC Transceiver 550m transmission, RoHS compliance April. 26, 2006 Mechanical Design Diagram The mechanical design diagram is shown in Figure 3. 9.90 11.90 27.95 65.60 12.99 30.30 57.30 8.30 3.05 1.70 25.50 30.50 33.20 12.75 37.48 Figure 3, Mechanical Design Diagram of GBIC Ordering information FTM 8 0 1 2 S G Wavelength 8: 850nm Others G: RoHS compliance Function 0:Standard Package G: GBIC Receptacle S: SC Data rate 12: 1.25G/1.0625G Part No. FTM-8012S-GG G Product Description 850nm, 1.0625~1.25Gbps, 550m, GBIC, RoHS compliant, 0°C~+70°C Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 7 of 7 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 4/27/2006 9:53 AM 1.25G GBIC Transceiver 550m transmission, RoHS compliance April. 26, 2006 Related Documents For further information, please refer to the following documents: FlexonTM GBIC Installation Guide FlexonTM GBIC Application Notes SFF-8053, Proposed Specification for GBIC (Gigabit Interface Converter), Rev 5.5 Obtaining Document You can visit our website: http://www.fiberxon.comT Or contact with Fiberxon, Inc. America Sales Office listed at the end of documentation to get the latest documents. Revision History Revision Initiate Review Approve Subject Rev. 1a Univer.Yang Simon.Jiang Walker.Wei Initial datasheet Rev. 1b Univer.Yang Simon.Jiang Walker.Wei Recension for formal datasheet Release Date Oct 24, 2005 April. 26, 2006 © Copyright Fiberxon Inc. 2006 All Rights Reserved. All information contained in this document is subject to change without notice. The products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Fiberxon’s product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained in specific environments, and is presented as an illustration. The results obtained in other operating environment may vary. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN ”AS IS” BASIS. In no event will Fiberxon be liable for damages arising directly from any use of the information contained in this document. Contact U.S.A. Headquarter: 5201 Great America Parkway, Suite 340 Santa Clara, CA 95054 U. S. A. Tel: 408-562-6288 Fax: 408-562-6289 Or visit our website: http://www.fiberxon.com Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 8 of 8 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 4/27/2006 9:53 AM