SOURCE T-11-1250-P3-SFC-APC-O-G5

1.25Gbps 3.3V PIN-TIA Receiver Modules- Pigtailed
(APC Type)
T-11-1250-P3-SXX/APC-X-XX
Features
• InGaAs/InP PIN Photodiode with transimpedance amplifier
• High sensitivity with AGC*
• Differential ended output
• Single +3.3V operation
• -40~85ºC operating temperature
Packaging
• SM fiber pigtailed with optional SFC/APC and SSC/APC connector
Application
• 1.25Gbps SDH/SONET/ATM receivers
• RoHS Compliant available
Absolute Maximum Ratings (Tc=25ºC)
Parameter
Symbol
Value
Unit
Supply Voltage
VCC
4.5
V
Operating Temperature
Topr
-40 ~ 85
ºC
Storage Temperature
Tstg
-40 ~ 85
ºC
DC Electrical Characteristics (Tc=25ºC)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Power Supply
VCC
3.0
3.3
3.6
V
Differential Ouptput Voltage
Vd
185
250
415
mV
Supply Current (no load)
Icc
-
26
50
mA
(Operating at VCC=3.3V,Tc=25ºC, λ=1310nm, 9/125µm SM fiber)
AC/Optical and Electrical Characteristics (Tc=25ºC)
Parameter
Symbol
Detection Range
Min
Typ
Max
Unit
1100
1310
1650
nm
Test Conditions
Measure differentially with 30uAp-p
signal
Gain@10Mbps Differential
G
1.92
2.5
3.4
V/mW
Bandwidth (to -3dB point)
BW
700
920
1100
MHz
Saturation Power
Psat
-3
0
-
dBm
BER<[email protected], PRBS27-1
Er=10dB
Sensitivity
Sens.
-
-26
-23
dBm
BER<[email protected], PRBS27-1
Er=10dB
Output Resistance
Rout
48
50
62
ohm
Note: 1.Pin assignment can be customized.
2.Specifications subject to change without
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
1
LUMNDS1549-MAR1106
rev. A.0
1.25Gbps 3.3V PIN-TIA Receiver Modules- Pigtailed
(APC Type)
T-11-1250-P3-SXX/APC-X-XX
Pin Assignment
Pin assignment
1~Vcc
2~Dout
3~Dout
4~GND(CASE)
Packaging Dimension
Units in mm.
Flange Type
"
Connector Type
":Flangeless
FC:FC/APC
"O":Horizonal (Omega Housing)
SC:SC/APC
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
2
LUMNDS1549-MAR1106
rev. A.0
1.25Gbps 3.3V PIN-TIA Receiver Modules- Pigtailed
(APC Type)
T-11-1250-P3-SXX/APC-X-XX
Ordering Information
T-11-1250-P3-SXX/APC-X-XX
Voltage
3=3.3V
Package
P=Pigtail
Connector
FC/SC
APC=APC Fiber
Flange
Fiber Application
"-" : without flange
"O" : O Type flange
S=SM 9/125µm
RoHS Compliant
-/G5/GR
Blank = RoHS non-compliant product
G5 = RoHS 5/6-compliant product (lead exemption)
GR = Full RoHS compliant product (no exemption)
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment
is highly recommended. Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Notice
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at Luminent's sole and absolute discretion.
Luminent warrants performance of its products to current specifications only in accordance with the company's standard one-year warranty; however, specifications designated as “preliminary" are given to describe components only, and Luminent expressly disclaims
any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company's Terms and Conditions of
Sale for further warranty information.
Luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right,
copyright, or intellectual property right, and Luminent makes no representations or warranties that the product(s) described herein
are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in
implantation or other life support applications where malfunction may result in injury or death to persons. Luminent customers using
or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify Luminent for any
damages resulting from such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS" BASIS. Customer agrees that Luminent is not liable for any
actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this
document. Customer must contact Luminent to obtain the latest version of this publication to verify, before placing any order, that
the information contained herein is current.
© LuminentOIC, Inc. 2006
All rights reserved
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
3
LUMNDS1549-MAR1106
rev. A.0