PHASE LOCKED OSCILLATOR MODEL 626106 (11 GHz) Features ! Low Phase Noise: -85 dBc/Hz @ 100 Hz ! Low Spurious: -70 dBc Typical ! External Reference: 100 MHz ! Environmental Screening Available Specifications CHARACTERISTIC Frequency Output Power (dBm) Variation Over Temperature (dBm) Spurious (dBc) Phase Noise (dB) Description TYPICAL Ta= 25 ºC 11 GHz MIN/MAX Ta = -20 ºC to +70 ºC 11 GHz +13 +12 +/- 0.75 dBm -70 -58 dBc/Hz @ 10 Hz -85 dBc/Hz @ 100 Hz -111 dBc/Hz @ 1 KHz -119 dBc/Hz @ 10 KHz -123 dBc/Hz @ 100 KHz +/- 1 dBm -60 VSWR Harmonics (dBc) External Reference (MHz) Lock Indicator Storage Temperature 1.5 -25 2.0 -20 100 TTL (High=Locked) -55 ºC 100 TTL (Low=Unlocked) +125 ºC Supply Power DC mA 15 120 15 125 Spectrum Microwave, Inc. www.SpectrumMicrowave.com Spectrum Microwave’s Series 600 Phase Locked Oscillators use a High “Q” Dielectric Resonator in the resonant circuit. The circuit is lightly loaded to obtain the lowest phase noise possible. The resonator is screwed to a printed circuit board and well grounded to minimize modulation sidebands during shock and vibration. Isolators are used to provide isolation from load VSWRs. Regulators filter noise on the DC input voltage. Internal reference models are also available. A lock indicator circuit is provided to signal an out-of-lock condition. 2707 Black Lake Place Phila, Pa. 19154 PH: 215-464-4000 FAX: 215-464-4001 Rev. 7/16/08 PHASE LOCKED OSCILLATOR MODEL 626106 (11 GHz) Outline Drawing Spectrum Microwave, Inc. www.SpectrumMicrowave.com 2707 Black Lake Place Phila, Pa. 19154 PH: 215-464-4000 FAX: 215-464-4001