RF AMPLIFIER MODEL PN7253 Available as: Features ! ! ! ! PN7253, 4 Pin .375” x .375” Sq. Surface Mount (SM11) Typical Intermodulation Performance at 25 º C High Gain: 32.0 dB Typical Low +5 Volt Supply Operating Temp. - 55 ºC to +85 ºC Environmental Screening Available Second Order Harmonic Intercept Point ...... +29 dBm (Typ.) Second Order Two Tone Intercept Point ....... +23 dBm (Typ.) Third Order Two Tone Intercept Point ........... +14 dBm (Typ.) Specifications CHARACTERISTIC TYPICAL Ta= 25 ºC Frequency 5 - 200 MHz 5 - 200 MHz 32.0 28.0 Min. +3.0 -2.0 Min. -35 -30 Max. 1.5:1 1.5:1 3.0 +5 30 2.0:1 Max. 2.0:1 Max. 4.0 Max. +5 40 Max. Gain (dB) Power @ 1 dB Comp. (dBm) Reverse Isolation (dB) VSWR In Out Noise Figure (dB) Power Vdc mA MIN/MAX Ta = -55 ºC to +85 ºC Maximum Ratings Ambient Operating Temperature .............. -55ºC to + 125 ºC Storage Temperature ............................... -62ºC to + 150 ºC Operating Case Temperature ................................. + 125 ºC DC Voltage ........................................................... + 8 Volts Continuous RF Input Power ................................. + 13 dBm Short Term RF Input Power .... 100 Milliwatts (1 Minute Max.) Maximum Peak Power .................... 0.5 Watt (3 µsec Max.) Note: Care should always be taken to effectively ground the case of each unit. Typical Performance Data Legend + 25 ºC + 85 ºC - - - - - - -55 ºC Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH (888) 553-7531 · Fax (888) 553-7532 12/06/06 www.spectrummicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, Pa. 19154 · PH (215) 464-4000 · Fax (215) 464-4001